Installation instructions contd, Venting

installation instructions (cont'd)

:illing the Water Heater

IACAUTION

Never use this water heater unless it is completely filled with water. To prevent damage to the tank, the tank must be filled with water. Water must flow from the hot water faucet

before turning "ON" gas to the water heater.

To fill the water heater with water:

•Close the water heater drain valve by turning the handle to

the right (clockwise). The drain valve is on the lower front of the water heater.

•Open the cold water supply valve to the water heater.

NOTE: The cold water supply valve must be left open when the water heater is in use.

"To insure complete _lling of the tank, allow air to exit by

opening the nearest hot water faucet, Allow water to run until a constant flow is obtained. This will let air out of the

water heater and the piping.

•Check aHnew water piping for leaks. Repair as needed.

Venting

]AWARNING

I VENT DAHPERS - Any vent damper, whether it is operated &ermally or otherwise must be removed if its use inhibitsprop- er drafting of the water heater.

Thermally Operated Vent Dampers: Gas.fired water heaters having thermal efficiency in excess of 80% may produce a rela- tively low flue gas temperature. Such temperatures may not be high enough to properly open thermally operated vent

dampers. This would cause spillage of flue gasesand may cause carbon monoxide poisoning.

Vent dampers must bear evidence of certification as complying with the latest edition of American National Standard ANSi

Z21.68 (ANSI Z21.66 & 67, respectively, cover electrically and mechanically actuated vent dampers). Before installation of any vent damper, consult your local Sears Service Center or the gas utility for further information.

AWARNING

To insure proper venting of this gas.fired water heater, the correct vent pipe diameter must be utilized. Any additions or: deletions of other gas appliances on a common vent with this water heater may adversely affect the operation of the water !; heater. Consult the local Sears Service Center or gas utility if _ any such changes are planned.

For proper venting in certain installations, a larger diameter vent pipe may be necessary. Due to great variances in installations, unforeseeable by the manufacturer of the water heater, you must consult your gas company to aid you in determining the proper

venting for your water heater from the vent tables in the latest edition of the Nationa! Fuel Gas Code ANSI Z223.1, also

referred to as NFPA 54.

Check the venting system for signs of obstruction or deterioration and replace if needed.

The combustion and ventilation air flow must not be obstructed.

AWARNING

Obstructed or deteriorated vent systems may present a serious health riskor asphyxiation.

"Place the draft hood legs in the receiving holes on the top of

the water heater. The legs will snap in the holes to give a tight _t.

•Place the vent pipe over the draft hood. With the vent pipe in position, drill a small hole through both the vent pipe and draft hood. Secure them together with a sheet metal screw.

VENT_._$

'_'

L VENT TO OUTDOORS OR

DRAFT I_O_

CH_x_NEY

AWARNING

The water heater with draft hood installed must be properly f vented to a chimney which terminates outdoors. Never oper- I ate the water heater unlessit is vented to the outdoors and has t adequate air supplyto avoid risksof improper operation, explo-

sionor asphyx_ion.

AWARNINGl

The vent pipe from the water heater must be no lessthan the I I diameter of the draft hood outlet on the water heater, and I must slope upward to the chimney at least ¼ inch per linear l

foot.

153.33651I, 33631I, 153.33655, 153.3368I1, 153.33625 specifications

Sears, an iconic American retailer, has undergone significant transformations and challenges throughout its history. One of its noteworthy products is the model number 153.514090.16, which represents a particular item in the extensive catalog of goods that Sears has offered over the decades.

The model 153.514090.16 is a home appliance, specifically a powerful and efficient space heater designed to provide warmth and comfort in residential settings. Its main features include a robust heating element that ensures rapid heat distribution throughout a room, making it an ideal choice for colder climates or drafty spaces.

One of the standout characteristics of this model is its adjustable thermostat, allowing users to set their desired temperature for optimal comfort. The heater also comes equipped with multiple heat settings, giving users the flexibility to customize the output based on their needs, whether it's a chilly evening or a moderate day.

The 153.514090.16 design emphasizes safety, incorporating features such as an automatic shut-off mechanism that activates when the unit is tipped over or reaches an unsafe temperature. This focus on safety reflects Sears' commitment to providing reliable and secure home appliances to its customers.

In terms of technology, this model incorporates energy-efficient technology that helps reduce electricity consumption while providing effective heating. This modern approach aligns with the increasing consumer demand for environmentally friendly appliances, making it a popular choice among energy-conscious households.

The construction of the 153.514090.16 includes durable materials that are designed to withstand the rigors of daily use while maintaining a sleek and contemporary aesthetic. Its compact size allows for easy placement in various locations, whether it’s a bedroom, living room, or even a workspace.

Sears has a rich history of delivering quality products across a wide range of categories, and model 153.514090.16 is a testament to its legacy of innovation and customer satisfaction. The integration of user-friendly features, safety precautions, and energy-efficient technology makes this space heater a valuable addition to any home.

As consumers continue to seek reliable and efficient heating solutions, the Sears 153.514090.16 stands as an example of the brand’s commitment to meeting the changing needs of its clientele in an ever-evolving marketplace.