Sears 153.336362 30 GALLON, 153.336162 ALL AIR from Inside Buildings, See on page 9 and below

Page 11

•Do not apply insulation to the top of the water heater, as this will interfere with safe operation of the draft hood.

•Do not cover the outer door, thermostat or temperature & pressure relief valve.

•Do not allow insulation to come within 2” (50.8 mm) of the floor to prevent blockage of combustion air flow to the burner.

•Do not cover the instruction manual. Keep it on the side of the water heater or nearby for future reference.

•Do obtain new warning and instruction labels from Sears for placement on the blanket directly over the existing labels.

•Do inspect the insulation blanket frequently to make certain it does not sag, thereby obstructing combustion air flow.

Combustion Air and Ventilation for Appliances Located in Unconfined Spaces

UNCONFINED SPACE is space whose volume is not less than 50 cubic feet per 1,000 Btu per hour (4.8 m3 per kW) of the aggregate input rating of all appliances installed in that space. Rooms communicating directly with the space in which the appliances are installed, through openings not furnished with doors, are considered a part of the unconfined space.

In unconfined spaces in buildings, infiltration may be adequate to provide air for combustion, ventilation and dilution of flue gases. However, in buildings of tight construction (for example, weather stripping, heavily insulated, caulked, vapor barrier, etc.), additional air may need to be provided using the methods described in Combustion Air and Ventilation for Appliances Located in Confined Spaces.

Combustion Air and Ventilation for Appliances Located in Confined Spaces

CONFINED SPACE is a space whose volume is less than 50 cubic feet per 1,000 Btu per hour (4.8 m3 per kW) of the aggregate input rating of all appliances installed in that space.

A.ALL AIR FROM INSIDE BUILDINGS:

(See Figure 9 on page 9 and Figure 10 below)

The confined space shall be provided with two permanent openings communicating directly with an additional room(s) of sufficient volume so that the combined volume of all spaces meets the criteria for an unconfined space. The total input of all gas utilization equipment installed in the combined space shall be considered in making this determination. Each opening shall have a minimum free area of one square inch per 1,000 Btu per hour (22 cm2/kW) of the total input rating of all gas utilization equipment in the confined space, but not less than 100 square inches (645 cm2). One opening shall

commence within 12 inches (30 cm) of the top and one commencing within 12 inches (30 cm) of the bottom of the enclosures.

FIGURE10.

B. ALL AIR FROM OUTDOORS: (See Figures 9, 11,12 and 13)

The confined space shall be provided with two permanent openings, one commencing within 12 inches (30 cm) of the top and one commencing within 12 inches (30 cm) from the bottom of the enclosure. The openings shall communicate directly, or by ducts, with the outdoors or spaces (crawl or attic) that freely communicate with the outdoors.

FIGURE11.

•When directly communicating with the outdoors, each opening shall have a minimum free area of 1 square inch per 4,000 Btu per hour (5.5 cm2/kW) of total input rating of all equipment in the enclosure, see Figure 12.

•When communicating with the outdoors through vertical ducts, each opening shall have a minimum free area of 1 square inch per 4,000 BTU per hour (5.5 cm2/kW) of total input rating of all equipment in the enclosure, see Figure 12.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A Power Miser GAS Water HeaterImportant Definitions Safe INSTALLATION, USE and ServiceSafety Precautions Table of Contents Customer Responsibilities Product SpecificationsTo Install or Operate the Water Heater Basic Tools Additional Tools Needed When Sweat SolderingMaterials and Basic Tools Needed Materials NeededPilot & Main Burner Typical InstallationThermostat Removing the Old Water Heater Installation InstructionsFacts to Consider About the Location Insulation Blankets See on page 9 and below ALL AIR from Inside BuildingsHotter Water can Scald Water PipingValve and Pipe Insulation Temperature-Pressure Relief Valve Venting Filling the Water HeaterGas Piping Sediment Traps GAS Piping with Flexible ConnectorOperating Instructions For Your Safety Read Before LightingTemperature Time to Produce 2nd & 3rd Temperature RegulationVent System Inspection Service and AdjustmentTank Sediment Cleaning Burner CleaningDraining Temperature-Pressure Relief Valve OperationHousekeeping Anode Rod InspectionService Drain Valve Washer ReplacementStart Up Conditions Troubleshooting GuideCondensation Operational ConditionsLeakage Checkpoints Troubleshooting Guide Page Page Parts Order List Burnerassembly153.336466 Gallon 153.336566 153.336962 Burner AssemblyWarranty Service Year Limited Warranty on Water HeaterYear Exclusive Kenmore Labor Warranty

153.336466 40 GALLON, 153.336162, 153.336262 40 GALLON SHORT, 153.336762 30 GALLON PROPANE (L.P.), 153.336362 30 GALLON specifications

Sears offers a range of propane storage tanks designed to meet various domestic and commercial heating needs. Among the popular models are the 40-gallon propane tank (L.P.) with the model numbers 153.336862 and 153.336466, as well as the 50-gallon tank identified by 153.336566, and the 30-gallon propane tank represented by 153.336762. Each of these tanks incorporates modern technologies and features tailored for efficiency, safety, and convenience.

The 40-gallon propane tank is an excellent choice for homeowners looking to efficiently store fuel for heating applications, cooking, or outdoor entertainment. Its compact design allows for easy installation in smaller spaces while ensuring sufficient fuel capacity for moderate consumption needs. The tank is constructed from high-quality steel, providing durability and resistance against environmental factors, ensuring long-lasting service.

Sears also provides the 50-gallon propane tank for users with higher fuel demand. This model is essential for households with larger heating requirements or for businesses utilizing propane for cooking or heating. The larger capacity reduces the frequency of refills and enhances convenience for users.

On the other hand, the 30-gallon propane tank serves as a reliable option for customers with minimal fuel needs. Whether for heating specific areas or powering smaller outdoor appliances, this model offers ample capacity while remaining manageable in size.

Safety features are paramount in all Sears propane tanks. Each tank is equipped with safety valves that prevent over-pressurization, along with a robust design that minimizes the risk of leaks. These tanks also meet stringent safety standards, ensuring users confidence in their performance.

Additionally, all models feature external brackets for easy installation and securing to a solid foundation, reducing the risk of accidents during use or adverse weather conditions. The tanks are compatible with various propane appliances, ensuring versatility across applications.

In conclusion, Sears provides a selection of propane tanks that combine practicality with advanced safety features. Whether users opt for the 30-gallon, 40-gallon, or 50-gallon models, they can trust in the quality and reliability of Sears propane tanks to efficiently meet their fuel storage needs while maintaining safety as a top priority.
Top Page Image Contents