Leakage Checkpoints

Operational Conditions (Continued)

FIGURE27.

Read this manual first. Then before checking the water heater make sure the gas supply has been turned “OFF”, and never turn the gas “ON” before the tank is completely full of water.

Never use this water heater unless it is completely filled with water. To prevent damage to the tank, the tank must be filled with water. Water must flow from the hot water faucet before turning “ON” gas to the water heater, see Figure 27.

A.Water at the draft hood is water vapor which has condensed out of the combustion products. This is caused by a problem in the vent. Contact the gas utility.

B.*Condensation may be seen on pipes in humid weather or pipe connections may be leaking.

C.*The anode rod fitting may be leaking.

D.Small amounts of water from temperature-pressure relief valve may be due to thermal expansion or high water pressure in your area.

E.*The temperature-pressure relief valve may be leaking at the tank fitting.

F.Water from a drain valve may be due to the valve being slightly opened.

G.*The drain valve may be leaking at the tank fitting.

H.Combustion products contain water vapor which can condense on the cooler surfaces of the tank. Droplets form and drip onto the burner or run on the floor. This is common at the time of start-up after installation and when incoming water is cold.

I.Water in the water heater bottom or on the floor may be from condensation, loose connections, or the relief valve. DO NOT replace the water heater until a full inspection of all possible water sources is made and necessary corrective steps taken.

Leakage from other appliances, water lines, or ground seepage should also be checked.

*To check where threaded portion enters tank, insert cotton swab between jacket opening and fitting. If cotton is wet, follow “Draining” instructions in the Periodic Maintenance section and then remove fitting. Put pipe dope or teflon tape on the threads and replace. Then follow Filling the Water Heater instructions in the Installing the New Water Heater section.

153.336466 40 GALLON, 153.336162, 153.336262 40 GALLON SHORT, 153.336762 30 GALLON PROPANE (L.P.), 153.336362 30 GALLON specifications

Sears offers a range of propane storage tanks designed to meet various domestic and commercial heating needs. Among the popular models are the 40-gallon propane tank (L.P.) with the model numbers 153.336862 and 153.336466, as well as the 50-gallon tank identified by 153.336566, and the 30-gallon propane tank represented by 153.336762. Each of these tanks incorporates modern technologies and features tailored for efficiency, safety, and convenience.

The 40-gallon propane tank is an excellent choice for homeowners looking to efficiently store fuel for heating applications, cooking, or outdoor entertainment. Its compact design allows for easy installation in smaller spaces while ensuring sufficient fuel capacity for moderate consumption needs. The tank is constructed from high-quality steel, providing durability and resistance against environmental factors, ensuring long-lasting service.

Sears also provides the 50-gallon propane tank for users with higher fuel demand. This model is essential for households with larger heating requirements or for businesses utilizing propane for cooking or heating. The larger capacity reduces the frequency of refills and enhances convenience for users.

On the other hand, the 30-gallon propane tank serves as a reliable option for customers with minimal fuel needs. Whether for heating specific areas or powering smaller outdoor appliances, this model offers ample capacity while remaining manageable in size.

Safety features are paramount in all Sears propane tanks. Each tank is equipped with safety valves that prevent over-pressurization, along with a robust design that minimizes the risk of leaks. These tanks also meet stringent safety standards, ensuring users confidence in their performance.

Additionally, all models feature external brackets for easy installation and securing to a solid foundation, reducing the risk of accidents during use or adverse weather conditions. The tanks are compatible with various propane appliances, ensuring versatility across applications.

In conclusion, Sears provides a selection of propane tanks that combine practicality with advanced safety features. Whether users opt for the 30-gallon, 40-gallon, or 50-gallon models, they can trust in the quality and reliability of Sears propane tanks to efficiently meet their fuel storage needs while maintaining safety as a top priority.