Thermostat Reset Upgrade Kit Installation Instructions
Main power lead harness.
Harness from contactor box.
Snap bushing inserted.
14.Remove contactor from box and connect main power and contactor harnesses, as shown. IMPORTANT – Main power MUST be on same side as flag terminals already attached to contactor (see photo). Remount contactor in box.
Main power harness
here.
Contactor 
harness
here.
15.Feed the remaining 4 wires (2 red, 2 orange) through hole.
Remount contactor in the box by locating this screw than turn the contactor to locate the other screw.
Feed these wires through the hole.
© 2005, IMI Cornelius Inc. | - 5 - | Publication Number: 629088480INS |