Cornelius 629088480 installation instructions Protection harnesses

Thermostat Reset Upgrade Kit Installation Instructions

29.Make sure all wires are in the safety circuit box, hold box in place against the frame, and drive 4 short thread-cutting screws (included in kit) through safety circuit box into frame.

30.Swing Contactor Box “closed” and place cover over box. Drive the 4 screws that were removed to hold cover and box in place on unit.

31.Replace lower back panel of unit. Move unit back into place for operation. Open the front control box to add the in-rush

protection harnesses.	In-Rush
	Protection
	Harness

© 2005, IMI Cornelius Inc. - 9 - Publication Number: 629088480INS