Niles Audio ZR-4 manual Restoring all Key Functions to Factory settings, Programming a Sequence

Page 27

2.Press 9 7 6. The Source Key LED blinks twice

3.Press a Source key twice (i.e., TV. VCR/DVD, CBL/ SAT, etc.) to clear all the learned keys for that device. The Source Key LED blinks twice and the R-6L exits from programming mode.

Restoring all Key Functions to Factory settings

1.Press and hold SETUP until a Source Key LED blinks twice, then release.

2.Enter 9 8 0. The LED blinks four times.

3.Press and hold SETUP until the red LED blinks twice, then release.

PROGRAMMING a Sequence

Your Niles R-6L Hand-Held Learning Remote Control includes the ability to program any key (other than the SETUP key) with a Sequence function. Each key can be set up to perform a pre- programmed set of sequential commands with the press of one key. A sequence can be used to control a home theater operation, to set a favorite channel, or for other multiple functions you would like to control with one key press. Moreover, each Key can hold a sequence of up to 15 commands.

NOTE: Programming a new sequence over an existing one erases the original sequence.

Programming a device-Dependent Sequence

1.Press a Source key.

2.Press and hold SETUP until the Source key LED blinks twice, then release.

3.Press 9 7 8. The Source key LED blinks twice.

4.Press the key to which you wish to assign a sequence.

5.Enter the series of commands (Key Presets) you want the sequence to execute (up to 15 commands).

6.Press and hold SETUP until the Source Key LED blinks twice, then release.

Now, when you press the sequence key, the remote sends the series of commands you have entered, but only if the device you selected in step 1 is selected. For example, you could program the sequence key to turn on both your TV and cable box and select a particular channel, but only if TV is selected. If DVD is selected, this key does not execute the sequence you set up for the TV. To clear the sequence, repeat steps 1-6 above, but do not enter a series of commands at step 5.

Operating the ZR-4 MultiZone receiver

Play The AM/FM Tuner

1.Press the Tuner key on any zone Keypad or the R-6L Remote Control and the zone will turn on to the preset start volume as well as the last selected station.

2.The 12V out on the rear panel of the ZR-4 MultiZone Receiver and the Keypad in that zone will become active.

3.Pressing the Tuner button will toggle through the preset stations in the ZR-4’s memory. If no presets are stored then the tuner will scan to the next station.

4.Additional control over the tuner’s functions is available using the R-6L Remote Control.

5.Volume + and Volume – will raise and lower the level of sound in the zone.

6.Pressing the Off key will turn off the zone. The 12V output on the keypad become inactive. The 12V output on the rear panel becomes inactive if all other zones are off.

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373

 

25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents ZR-4SERIES Congratulations Niles ZR-4 MultiZone Receiver Kit IntroductionBuilt-In AM/FM Tuner Hand-Held Learning Remote ControlParty or Whole House Mode Four-Source, Four-Zone MultiZone ReceiverZR-4 MultiZone Receiver ContentsThree seconds turns off the entire system all zones Weather-Resistant KeypadInstallation Considerations Placement of the ZR-4 Multizone ReceiverCAT-5 Cable T568A Termination System configurationGlobal 12V Control Output Source ComponentsKeypads MicroFlasher OutputsVolt Speaker Wire System ConfigurationExpansion Connection Source component controlExternal Control IR Control Input HT SyncZR-4 can share source components with a home theater system Niles ZR-KE Keypad Expander RS-232 Connection12V Trigger Output Pre-Amp OutputTelephone and/or doorbell paging Connect the Audio Input Cables Connect the Speaker WiresPreparation Attach the Rack Mount Ears if NeededChassis Connect the IR FlashersConnect the Keypad CAT-5 Cables Connect the Slave ZR-4 MultiZone ReceiverConnect External Control if Needed Connect the Main Power CableConnect the Global 12V OUT Connect the HT Home theater Sync if NeededChanging the Keypad Color Keypad InstallationInstall the Master KEYs Choose a Mounting LocationMaster/Slave Main PowerConfiguration Mode Configuring the MultiZone receiverMode Volume Paging volume level for all selected zones is adjustableZR-4 will return to normal operating mode Zone 4 Speakers Default TURN-ON VolumeConfiguring the zone Setting up the AM/FM TunerBattery Use And Safety Bass AdjustmentTreble adjustment Installing BatteriesChecking the Codes Configure TV and AuxConfiguring the Hand-Held remote Searching for Your CodeDeleting a Single Learned Key Configuring sources 2,3,Learning Precautions Programming a Learned KeyPlay The AM/FM Tuner Restoring all Key Functions to Factory settingsProgramming a Sequence Programming a device-Dependent SequenceParty Mode TroubleshootingPlay Sources HAND-HELD Remote Control Troubleshooting Tuner Section SpecificationsNiles Audio Corporation 1-800-BUY-HIFI L e s a u d i o C o r p o r a t i o n
Related manuals
Manual 2 pages 6.51 Kb

ZR-4 specifications

The Niles Audio ZR-4 represents a significant advancement in multi-room audio technology, designed to deliver an exceptional listening experience throughout your home. As a zone amplifier, it is engineered to serve multiple rooms or zones simultaneously, making it a perfect choice for music enthusiasts who want to enjoy high-quality audio in various settings without the need for multiple audio systems.

One of the standout features of the ZR-4 is its ability to support up to four different audio sources, allowing users to simultaneously play different music in multiple zones. This feature is particularly appealing for families or households with diverse musical tastes, as it provides the flexibility to cater to everyone’s preferences. Each of the four zones can be individually controlled, enabling different volumes and selections, thus ensuring a personalized listening experience.

The ZR-4 is built with advanced technologies aimed at enhancing audio quality and performance. It utilizes a Class D amplification design, which not only increases efficiency but also helps deliver a clean and powerful audio signal. This design allows the unit to maintain high sound quality without generating excessive heat, ensuring continuous operation without the need for elaborate cooling systems.

Another impressive characteristic of the ZR-4 is its user-friendly operation. The system is compatible with the Niles Audio IC series of in-wall and in-ceiling speakers, making installation straightforward for both professionals and DIY enthusiasts. Additionally, the ZR-4 offers 12-volt trigger outputs, which can be utilized to control external devices, streamlining the integration of the ZR-4 into existing home automation systems.

Connectivity is also a significant aspect of the ZR-4, as it includes a variety of input options, including line-level inputs and speaker-level inputs, making it adaptable to various audio setups. Its compact design allows for easy placement within cabinets or racks, conserving valuable space while maintaining an unobtrusive presence.

Overall, the Niles Audio ZR-4 embodies sophistication and versatility in multi-room audio distribution. With its powerful amplification, source flexibility, and advanced features, it is an ideal solution for those looking to enhance their home audio experience while enjoying the convenience of seamless control over multiple zones. This unit is not just an investment in audio; it is an investment in lifestyle, elevating the way music can be enjoyed in everyday life.
Top Page Image Contents