Niles Audio ZR-4 manual HAND-HELD Remote Control Troubleshooting

Page 29

Troubleshooting continued

solution:

• Call Niles Tech Support

PROBLEM:

6. Poor or no radio reception solution:

•Check the receiver’s back panel to see if the FM dipole and AM loop antennas are connected. It may be necessary to reposition them to optimize reception.

PROBLEM:

7. Keypad does not function solution:

•Make sure that the CAT-5 cable is terminated using T568A wiring convention.

(See Figure 2)

•Check that the RJ-45 connector is firmly seated in the back of the keypad

PROBLEM:

8. No source control

solution:

•The infrared MicroFlasher® is not connected properly to the back of the receiver

•The infrared MicroFlasher® is not affixed properly to the controlled component

•The batteries in the hand-held remote control are dead

•The IR Sensor is turned off (see page 22)

PROBLEM:

9. A Zone does not turn on when in the Party Mode solution:

•Check the system configuration settings for Party or Whole House Mode (page 19)

PROBLEM:

10. A Zone does not turn on when in the Paging Mode solution:

•Check the system configuration settings for Paging (page 19)

HAND-HELD REMOTE CONTROL TROUBLESHOOTING

PROBLEM:

1. LED does not blink when you press a key. solution:

•Try pressing different keys. Replace the batteries with 2 new AA batteries

PROBLEM:

2. LED blinks when you press a key, but device does not respond. solution:

•Make sure the remote is aimed at your device and is not more than 40 feet away

PROBLEM:

3. LED blinks one long blink while in SETUP mode. solution:

•An entry error has occurred (for example, wrong key). Try entering the sequence again

PROBLEM:

4.Remote does not control devices or commands are not working properly.

solution:

•Try all listed codes for the device. Make sure the device operates with an infrared remote control

PROBLEM:

5. CH+, CH-, and LAST do not work for your RCA TV. solution:

•Due to RCA design from 1983 to 1987, only the original remote control will operate these functions

PROBLEM:

6.Channels do not change properly when directly entering digits to change channels.

solution:

•If the original remote control required you to press Enter to change channels, press Enter on this remote after entering the channel number

 

(continued on next page)

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373

 

27

Page 28 Page 30
Image 29
Page 28 Page 30
Contents ZR-4SERIES Congratulations Niles ZR-4 MultiZone Receiver Kit IntroductionParty or Whole House Mode Hand-Held Learning Remote ControlFour-Source, Four-Zone MultiZone Receiver Built-In AM/FM TunerZR-4 MultiZone Receiver ContentsThree seconds turns off the entire system all zones Weather-Resistant KeypadInstallation Considerations Placement of the ZR-4 Multizone ReceiverCAT-5 Cable T568A Termination System configurationKeypads Source ComponentsMicroFlasher Outputs Global 12V Control OutputVolt Speaker Wire System ConfigurationExternal Control Expansion ConnectionSource component control ZR-4 can share source components with a home theater system IR Control InputHT Sync Niles ZR-KE Keypad Expander RS-232 Connection12V Trigger Output Pre-Amp OutputTelephone and/or doorbell paging Preparation Connect the Speaker WiresAttach the Rack Mount Ears if Needed Connect the Audio Input CablesConnect the Keypad CAT-5 Cables Connect the IR FlashersConnect the Slave ZR-4 MultiZone Receiver ChassisConnect the Global 12V OUT Connect the Main Power CableConnect the HT Home theater Sync if Needed Connect External Control if NeededInstall the Master KEYs Keypad InstallationChoose a Mounting Location Changing the Keypad ColorConfiguration Mode Main PowerConfiguring the MultiZone receiver Master/SlaveZR-4 will return to normal operating mode Mode VolumePaging volume level for all selected zones is adjustable Zone 4 Speakers Default TURN-ON VolumeConfiguring the zone Setting up the AM/FM TunerTreble adjustment Bass AdjustmentInstalling Batteries Battery Use And SafetyConfiguring the Hand-Held remote Configure TV and AuxSearching for Your Code Checking the CodesLearning Precautions Configuring sources 2,3,Programming a Learned Key Deleting a Single Learned KeyProgramming a Sequence Restoring all Key Functions to Factory settingsProgramming a device-Dependent Sequence Play The AM/FM TunerPlay Sources Party ModeTroubleshooting HAND-HELD Remote Control Troubleshooting Tuner Section SpecificationsNiles Audio Corporation 1-800-BUY-HIFI L e s a u d i o C o r p o r a t i o n
Related manuals
Manual 2 pages 6.51 Kb

ZR-4 specifications

The Niles Audio ZR-4 represents a significant advancement in multi-room audio technology, designed to deliver an exceptional listening experience throughout your home. As a zone amplifier, it is engineered to serve multiple rooms or zones simultaneously, making it a perfect choice for music enthusiasts who want to enjoy high-quality audio in various settings without the need for multiple audio systems.

One of the standout features of the ZR-4 is its ability to support up to four different audio sources, allowing users to simultaneously play different music in multiple zones. This feature is particularly appealing for families or households with diverse musical tastes, as it provides the flexibility to cater to everyone’s preferences. Each of the four zones can be individually controlled, enabling different volumes and selections, thus ensuring a personalized listening experience.

The ZR-4 is built with advanced technologies aimed at enhancing audio quality and performance. It utilizes a Class D amplification design, which not only increases efficiency but also helps deliver a clean and powerful audio signal. This design allows the unit to maintain high sound quality without generating excessive heat, ensuring continuous operation without the need for elaborate cooling systems.

Another impressive characteristic of the ZR-4 is its user-friendly operation. The system is compatible with the Niles Audio IC series of in-wall and in-ceiling speakers, making installation straightforward for both professionals and DIY enthusiasts. Additionally, the ZR-4 offers 12-volt trigger outputs, which can be utilized to control external devices, streamlining the integration of the ZR-4 into existing home automation systems.

Connectivity is also a significant aspect of the ZR-4, as it includes a variety of input options, including line-level inputs and speaker-level inputs, making it adaptable to various audio setups. Its compact design allows for easy placement within cabinets or racks, conserving valuable space while maintaining an unobtrusive presence.

Overall, the Niles Audio ZR-4 embodies sophistication and versatility in multi-room audio distribution. With its powerful amplification, source flexibility, and advanced features, it is an ideal solution for those looking to enhance their home audio experience while enjoying the convenience of seamless control over multiple zones. This unit is not just an investment in audio; it is an investment in lifestyle, elevating the way music can be enjoyed in everyday life.
Top Page Image Contents