Niles Audio ZR-4 manual Connect the IR Flashers, Connect the Keypad CAT-5 Cables, Chassis

Page 17

CONNECT THE IR FLASHERS

MicroFlasher® to the Flasher Outputs

The mini-plug of each included Niles MicroFlasher connects into the Flasher Outputs

2-4. The MicroFlasher portion is placed directly over the IR sensor of the corresponding source component (Source 2 for Flasher 2, Source 3 for Flasher 3, Source 4 for Flasher

4)and adheres with the included adhesive. Remove the protective paper cover to expose the adhesive and attach to the source component.

High-Output Flasher to the high output flasher port

The mini-plug of an optional Niles High Output Flasher, Model IRB-1 (FG01023), connects to the High Output Flasher Port. The IRB-1 is strategically positioned to provide IR transmission to all source components and adheres to a shelf with an included Velcro® mounting system.

CAUTION: Do not connect MicroFlashers to this port. The High output flasher port will damage MicroFlashers

CONNECT THE KEYPAD CAT-5 CABLES

Each Keypad controls a specific zone. The RJ-45 terminated CAT-5 cable that runs to each keypad is connected to the ZR-4 MultiZone Receiver’s keypad connectors labeled: ZONE 1, ZONE 2, ZONE 3, and ZONE 4. The zone that each keypad is connected to defines the number of that zone. For example: the keypad that is connected to ZONE

1 will always be defined as ZONE 1. All RJ-45 terminated CAT-5 cable must utilize the T568A wiring convention.

CONNECT THE SLAVE ZR-4 MultiZone Receiver

CHASSIS

Two ZR-4 MultiZone Receiver Kits can be combined to create a four-source, eight-zone system. The Expansion Port connects the two receivers by a RJ-45 terminated CAT-5 cable using the T568A wiring convention. One receiver must be designated as the Master, the other as the Slave (see configuration page 8). All flashers for source control must be connected to the Master and not to the Slave. IR from the keypads connected to the Slave

chassis will be routed to the Master chassis via the expansion connection port.

Figure 12. Connecting IR Flashers to ZR-4

MultiZone Receiver

8= BROWN

7= BROWN/WHITE

6= ORANGE

5= BLUE/WHITE

4= BLUE

3= ORANGE/WHITE

2= GREEN

1= GREEN/WHITE

Figure 13. T568A wire termination

CONNECT THE AM AND FM ANTENNAS

When using two ZR-4 MultiZone Receiver kits to create an 8-zone system, antennas must be connected to both ZR-4 MultiZone Receivers.

FM Dipole Antenna

The included FM Dipole Antenna connects to the female 75 ohm coaxial connector. The antenna is then positioned and mounted for best reception.

AM Loop Antenna

The included AM Loop Antenna connects with its bare-wire ends to the spring-loaded terminals labeled AM and GND. The antenna is then positioned and mounted for best reception.

 

KEYPAD ZONES

 

 

FLASHERS

HT Sync

AUDIO

ZONE 1

ZONE 2

ZONE 3

ZONE 4

120 Volts ~ 60Hz. 1500 Watts Max.

Expansion

1

2

2

3

 

L

8 Ω (4 Ω Min.)

8 Ω (4 Ω Min.)

8 Ω (4 Ω Min.)

8 Ω (4 Ω Min.)

L

 

 

 

 

 

Speaker Outputs

Speaker Outputs

Speaker Outputs

Speaker Outputs

 

 

 

 

 

 

 

 

Page

 

 

 

 

 

 

 

 

AM/FM

 

 

 

L+L+

L-

R-

R+R+

L+

L-

R-

R+

L+

L-

R-

R+

L+

L-

R-

R+

 

 

 

 

 

 

 

 

 

 

 

 

3

4

4

HP

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R

 

 

 

 

 

12 V

RS 232

IR In

2

3

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pre Out

Fix

Var

 

 

 

Trigger

 

Global

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 14. Connecting AM/FM Antennas to ZR-4 MultiZone Receiver

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373

 

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents ZR-4SERIES Congratulations Niles ZR-4 MultiZone Receiver Kit IntroductionParty or Whole House Mode Hand-Held Learning Remote ControlFour-Source, Four-Zone MultiZone Receiver Built-In AM/FM TunerZR-4 MultiZone Receiver ContentsThree seconds turns off the entire system all zones Weather-Resistant KeypadInstallation Considerations Placement of the ZR-4 Multizone ReceiverCAT-5 Cable T568A Termination System configurationKeypads Source ComponentsMicroFlasher Outputs Global 12V Control OutputVolt Speaker Wire System ConfigurationExternal Control Expansion ConnectionSource component control ZR-4 can share source components with a home theater system IR Control InputHT Sync Niles ZR-KE Keypad Expander RS-232 Connection12V Trigger Output Pre-Amp OutputTelephone and/or doorbell paging Preparation Connect the Speaker WiresAttach the Rack Mount Ears if Needed Connect the Audio Input CablesConnect the Keypad CAT-5 Cables Connect the IR FlashersConnect the Slave ZR-4 MultiZone Receiver ChassisConnect the Global 12V OUT Connect the Main Power CableConnect the HT Home theater Sync if Needed Connect External Control if NeededInstall the Master KEYs Keypad InstallationChoose a Mounting Location Changing the Keypad ColorConfiguration Mode Main PowerConfiguring the MultiZone receiver Master/SlaveZR-4 will return to normal operating mode Mode VolumePaging volume level for all selected zones is adjustable Zone 4 Speakers Default TURN-ON VolumeConfiguring the zone Setting up the AM/FM TunerTreble adjustment Bass AdjustmentInstalling Batteries Battery Use And SafetyConfiguring the Hand-Held remote Configure TV and AuxSearching for Your Code Checking the CodesLearning Precautions Configuring sources 2,3,Programming a Learned Key Deleting a Single Learned KeyProgramming a Sequence Restoring all Key Functions to Factory settingsProgramming a device-Dependent Sequence Play The AM/FM TunerPlay Sources Party ModeTroubleshooting HAND-HELD Remote Control Troubleshooting Tuner Section SpecificationsNiles Audio Corporation 1-800-BUY-HIFI L e s a u d i o C o r p o r a t i o n
Related manuals
Manual 2 pages 6.51 Kb

ZR-4 specifications

The Niles Audio ZR-4 represents a significant advancement in multi-room audio technology, designed to deliver an exceptional listening experience throughout your home. As a zone amplifier, it is engineered to serve multiple rooms or zones simultaneously, making it a perfect choice for music enthusiasts who want to enjoy high-quality audio in various settings without the need for multiple audio systems.

One of the standout features of the ZR-4 is its ability to support up to four different audio sources, allowing users to simultaneously play different music in multiple zones. This feature is particularly appealing for families or households with diverse musical tastes, as it provides the flexibility to cater to everyone’s preferences. Each of the four zones can be individually controlled, enabling different volumes and selections, thus ensuring a personalized listening experience.

The ZR-4 is built with advanced technologies aimed at enhancing audio quality and performance. It utilizes a Class D amplification design, which not only increases efficiency but also helps deliver a clean and powerful audio signal. This design allows the unit to maintain high sound quality without generating excessive heat, ensuring continuous operation without the need for elaborate cooling systems.

Another impressive characteristic of the ZR-4 is its user-friendly operation. The system is compatible with the Niles Audio IC series of in-wall and in-ceiling speakers, making installation straightforward for both professionals and DIY enthusiasts. Additionally, the ZR-4 offers 12-volt trigger outputs, which can be utilized to control external devices, streamlining the integration of the ZR-4 into existing home automation systems.

Connectivity is also a significant aspect of the ZR-4, as it includes a variety of input options, including line-level inputs and speaker-level inputs, making it adaptable to various audio setups. Its compact design allows for easy placement within cabinets or racks, conserving valuable space while maintaining an unobtrusive presence.

Overall, the Niles Audio ZR-4 embodies sophistication and versatility in multi-room audio distribution. With its powerful amplification, source flexibility, and advanced features, it is an ideal solution for those looking to enhance their home audio experience while enjoying the convenience of seamless control over multiple zones. This unit is not just an investment in audio; it is an investment in lifestyle, elevating the way music can be enjoyed in everyday life.
Top Page Image Contents