Niles Audio ZR-4 manual Setting up the AM/FM Tuner, Configuring the zone

Page 23

configuring the zone

Press the + button to confirm the erase procedure. The display will show [MASTER DEFAULT RESTORED].

M A S T E R

D E F A U L T R E S T O R E D

Press the – button (at either screen) to exit and move to the next step without erasing any information.

To continue to the first configuration step, Master/Slave, press the Set button.

To save the settings and exit configuration mode, simultaneously hold down the Band and Set buttons. After the ZR-4 saves the information, [RELEASE BUTTONS TO CONTINUE] appears on the display. The ZR-4 will return to the normal operating mode.

Setting up the AM/FM Tuner

The built-in tuner can store up to twenty presets in any combination of AM or FM stations. In Master/Slave configurations, each

tuner could store different presets providing a system total of 40. However, each keypad can only operate the tuner in the ZR-4 MultiZone Receiver to which it is connected, so each zone has access to 20 presets.

To store presets in the tuner:

Press the Band button to choose between AM or FM. The display will show AM or FM to indicate the current band along with the current station [AM560].

A M 5 6 0

Press the + or – button to tune to the desired station. Each press and release will increment the tuner frequency up or down. A press-and- hold initiates the seek function. The tuner will move up or down to the next station with a clear signal. Continuing to hold the button will cause the tuner to pause at any station for 3 seconds before seeking the next station. Releasing the button will stop the seek function and the tuner will remain on the last tuned station.

F M 9 3 . 1

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373

Once the desired station is displayed, press-and-hold the Set button (2 seconds). The display will change to [Preset XX Save] where XX is the next available open preset.

F M 9 3 .

1

P R E S E T

0 1 S A V E

Press the + or – buttons until the desired preset location is displayed (01 – 20). It will always stop at the first available blank preset. Press the + or – button to overwrite any previously saved preset.

F M 9 3 . 1

P R E S E T 0 1

NOTE: If the selected preset already has a station assigned, it will be overwritten and the new station will now be stored in that preset location.

Press-and-hold the Set button for 2 seconds. This will save the station in the displayed preset location. The ZR-4 MultiZone Receiver will return to normal operation. The display will show the station and the preset.

F M 9 4 . 9

P R E S E T 2

Repeat these steps until all desired stations are preset or the available twenty presets are filled.

Presets may be erased one of two ways: by storing a new preset in the location; or by entering configuration mode and electing to erase all presets (see “Erasing Tuner Preset Information”).

(continued on next page)

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents ZR-4SERIES Congratulations Niles ZR-4 MultiZone Receiver Kit IntroductionBuilt-In AM/FM Tuner Hand-Held Learning Remote ControlParty or Whole House Mode Four-Source, Four-Zone MultiZone ReceiverZR-4 MultiZone Receiver ContentsThree seconds turns off the entire system all zones Weather-Resistant KeypadInstallation Considerations Placement of the ZR-4 Multizone ReceiverCAT-5 Cable T568A Termination System configurationGlobal 12V Control Output Source ComponentsKeypads MicroFlasher OutputsVolt Speaker Wire System ConfigurationExternal Control Expansion ConnectionSource component control ZR-4 can share source components with a home theater system IR Control InputHT Sync Niles ZR-KE Keypad Expander RS-232 Connection12V Trigger Output Pre-Amp OutputTelephone and/or doorbell paging Connect the Audio Input Cables Connect the Speaker WiresPreparation Attach the Rack Mount Ears if NeededChassis Connect the IR FlashersConnect the Keypad CAT-5 Cables Connect the Slave ZR-4 MultiZone ReceiverConnect External Control if Needed Connect the Main Power CableConnect the Global 12V OUT Connect the HT Home theater Sync if NeededChanging the Keypad Color Keypad InstallationInstall the Master KEYs Choose a Mounting LocationMaster/Slave Main PowerConfiguration Mode Configuring the MultiZone receiverZR-4 will return to normal operating mode Mode VolumePaging volume level for all selected zones is adjustable Zone 4 Speakers Default TURN-ON VolumeConfiguring the zone Setting up the AM/FM TunerBattery Use And Safety Bass AdjustmentTreble adjustment Installing BatteriesChecking the Codes Configure TV and AuxConfiguring the Hand-Held remote Searching for Your CodeDeleting a Single Learned Key Configuring sources 2,3,Learning Precautions Programming a Learned KeyPlay The AM/FM Tuner Restoring all Key Functions to Factory settingsProgramming a Sequence Programming a device-Dependent SequencePlay Sources Party ModeTroubleshooting HAND-HELD Remote Control Troubleshooting Tuner Section SpecificationsNiles Audio Corporation 1-800-BUY-HIFI L e s a u d i o C o r p o r a t i o n
Related manuals
Manual 2 pages 6.51 Kb

ZR-4 specifications

The Niles Audio ZR-4 represents a significant advancement in multi-room audio technology, designed to deliver an exceptional listening experience throughout your home. As a zone amplifier, it is engineered to serve multiple rooms or zones simultaneously, making it a perfect choice for music enthusiasts who want to enjoy high-quality audio in various settings without the need for multiple audio systems.

One of the standout features of the ZR-4 is its ability to support up to four different audio sources, allowing users to simultaneously play different music in multiple zones. This feature is particularly appealing for families or households with diverse musical tastes, as it provides the flexibility to cater to everyone’s preferences. Each of the four zones can be individually controlled, enabling different volumes and selections, thus ensuring a personalized listening experience.

The ZR-4 is built with advanced technologies aimed at enhancing audio quality and performance. It utilizes a Class D amplification design, which not only increases efficiency but also helps deliver a clean and powerful audio signal. This design allows the unit to maintain high sound quality without generating excessive heat, ensuring continuous operation without the need for elaborate cooling systems.

Another impressive characteristic of the ZR-4 is its user-friendly operation. The system is compatible with the Niles Audio IC series of in-wall and in-ceiling speakers, making installation straightforward for both professionals and DIY enthusiasts. Additionally, the ZR-4 offers 12-volt trigger outputs, which can be utilized to control external devices, streamlining the integration of the ZR-4 into existing home automation systems.

Connectivity is also a significant aspect of the ZR-4, as it includes a variety of input options, including line-level inputs and speaker-level inputs, making it adaptable to various audio setups. Its compact design allows for easy placement within cabinets or racks, conserving valuable space while maintaining an unobtrusive presence.

Overall, the Niles Audio ZR-4 embodies sophistication and versatility in multi-room audio distribution. With its powerful amplification, source flexibility, and advanced features, it is an ideal solution for those looking to enhance their home audio experience while enjoying the convenience of seamless control over multiple zones. This unit is not just an investment in audio; it is an investment in lifestyle, elevating the way music can be enjoyed in everyday life.
Top Page Image Contents