Advanced Installer Menu
Faults Status
This menu item lists current equipment fault conditions. If no faults are detected, this screen will show nothing. (See “System Fault Codes” on page 28.)
USB Upload
The USB Upload menu displays a list of thermostat parameters that can be loaded to the thermostat from a USB memory device. If the USB port detects a USB memory device, this menu will automatically display.
In the USB Upload menu, select the item to upload and press
to mark the item with a red box. After all items to upload are selected, press the Upload button.
If the thermostat does not find informa- tion when the Upload button is pressed, the display will indicate, “Invalid Data
Found. Installation Failed!”
Once the upload is accomplished, the display will indicate “Successfully Installed” for 3 seconds then will display the menu or mode prior to entering the USB upload menu.
To use the USB Upload feature, go to
ADVANCED INSTALLER MENU
17