Niles Audio RS 5s manual Upgraded Security Attachment Method Optional

Page 16

INSTALLATION

5.Feed the Security Stake through the loops at the end of the security cable and insure that they are inserted into the cable holder provided at the top of the stake, as shown in Figure 12.

6.Pick a spot in the ground which the loudspeaker will cover and drive the security stake all the way into the ground until the cable holder is completely under the surface of the ground, as shown in Figure 13.

7.Pull on the security cable and verify that the stake is securely held in the ground.

Upgraded Security Attachment Method (Optional)

To perform this attachment method you will need the following items:

1.(1) Stainless Steel Eyebolt

2.(1) Concrete Anchor sized to the Stainless Steel Eyebolt

3.(1) Bag of Quikcrete – fast drying cement mix or equivalent

4.A post hole digger or shovel

5.(1) Stainless Steel Aircraft Cable 1/8” diameter or larger

6.(2) Stainless steel wire rope clamps sized to the aircraft cable chosen

To install an upgraded security system:

1.Prepare a hole that is at least one-foot deep, at a minimum (three-feet if the speaker is being installed in an area that has a frost line). The hole should be at least six inches in diameter. This hole should be under the desired location of the loudspeaker.

2.Once the hole is prepared, mix the concrete per its’ instructions. Fill the hole with concrete. Place the concrete anchor in the center of the concrete so the top of the anchor is flush with the top of the concrete and the anchor is not filled with concrete.

3.Wait until the concrete is dried per the instructions on the concrete mix used.

4.Screw the stainless steel eyebolt into the concrete anchor

5.Feed one end of the stainless steel aircraft cable through the eyebolt in the concrete

6.Loop the end of the aircraft cable around the eyebolt and back to the aircraft cable. Secure this end of the cable to the main aircraft cable with the wire rope clamp.

15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents RS5 Table of Contents Introduction Features & Benefits Connection Cable with Water Resistant Wire Nuts Precision CrossoverConeForward Design Rigid Acoustically Inert Cabinet ConstructionTools and Materials Required Installation ConsiderationsSelecting the number and location for your speakers Stereo Coverage 6 speakers Installation Considerations Choosing the Speaker CableIncorporating a Volume Control 60 ft 18 m 100 ft 30 m 160 ft 50 mTwo Zone Volume Control Wiring Recommended Amplifier PowerConnecting the loudspeaker InstallationRun the speaker cable Speaker wire preparation Speaker PhaseVerify System Operation and Loudspeaker Coverage Installing the Security Bracket and Cable Security Cable in EyeletSecurity Stake Driven into Ground Upgraded Security Attachment Method Optional To install an upgraded security systemFinal Adjustments Cleaning Listening at Higher VolumesOperation Specifications Nominal ImpedanceNiles Audio Corporation

RS 5s specifications

The Niles Audio RS 5s are a remarkable addition to any enthusiast’s audio setup, offering a blend of advanced technology, thoughtful design, and superior sound quality. These speakers are engineered to deliver an immersive audio experience, underpinned by a host of features that cater to both casual listeners and audiophiles alike.

One of the standout features of the RS 5s is their dynamic range. They incorporate a 5.25-inch woofer that delivers deep, rich bass, allowing for an expanded low-frequency response that enhances music and movie soundtracks alike. This woofer works in conjunction with a 1-inch silk dome tweeter, which ensures that high frequencies are reproduced with clarity and precision, resulting in a balanced sound profile that captures the nuances of the audio.

The construction of the RS 5s also contributes significantly to their performance. Designed with MDF cabinets, these speakers minimize resonance and distortion, promoting a cleaner sound output. The cabinets are finished with an attractive veneer that not only enhances aesthetic appeal but also reinforces durability. Additionally, the speakers come equipped with a rear-firing bass port that aids in delivering increased bass extension and responsiveness, allowing for greater flexibility in placement within a room.

Another noteworthy aspect of the Niles Audio RS 5s is their versatility. They are designed for both indoor and outdoor use, making them an excellent choice for various settings, from home theaters to backyard gatherings. The weather-resistant design ensures longevity when exposed to outdoor conditions, which is crucial for users who enjoy entertaining outside.

In terms of connectivity, the RS 5s support a range of integration options, allowing them to seamlessly connect with various audio systems, including multi-room setups. This compatibility makes them a smart choice for those looking to create a cohesive audio environment throughout their living spaces.

Overall, the Niles Audio RS 5s stand out due to their impressive sound quality, robust build, and innovative features that cater to a wide array of audio applications. Whether you're enjoying your favorite music or watching an action-packed movie, these speakers promise an engaging auditory experience that elevates your listening pleasure to new heights.
Top Page Image Contents