KitchenAid KFP1133 manual Attaching the work bowl cover, Installing the adjustable slicing disc

ASSEMBLINGCMD + SHIFTTHECLICKFOODTO CHANGEPROCESSORCOPY

Attaching the wor_k bowl cover_

NOTE: Be sure to install the desired accessory before attaching the work bowl cover.

1	Place the work bowl cover on the work
	bowl with the feed tube just to the left

of the work bowl handle. Grasp the feed tube and turn the cover to the right until it locks into place.

2	Fit the food pusher into the 3-in-1
	feed tube. See “Using the 3-in-1 feed

tube” for details on working with different sized foods.

Installing the adjustable slicing disc

1	Hold the slicing disc by the finger grips
	and lower it onto the drive adapter.

2	Install the work bowl cover, being sure
	it locks into place.

TIP: You may need to turn the disc/drive adapter until it drops down into place.

Adjusting the slicing thickness

Thinner_

Thicker_

NOTE: The lever only works with the adjustable slicing disc. Changing thickness settings with other discs or blades installed will have no effect on operation.

Set the desired slicing thickness by moving the lever to the left for thinner slices or to the right for thicker slices.

10