AT&T TL71308 user manual Battery installation & charging, Batteries Chinain

Getting started

Battery installation & charging

Install the battery as shown below. After installing the battery, you can make and receive short calls, but replace the handset in the telephone base or additional charger when not in use. For optimal performance, charge the handset battery for at least 16 hours before use. When fully charged, the handset battery provides approximately five hours of talk time and three days of standby time.

If the battery is depleted, it may take approximately four minutes to charge the handset before it can resume screen display. The screen will continue to display LOW BATTERY until the battery has charged for approximately one hour.

			BATTERIES CHINAIN					Ni-MH	BATTERIES		CHINAIN
SIDETHIS	PackBattery BT5633/BT6823 550mAh3.6VUPSIDETHISMHNi-					SIDETHISUP PackBattery	BT5633/BT6823PackBattery	NiMH-	BURNORNOTT	BATTERIES
		PackBattery	MH-Ni	BURNNOT	CHINAINMADE				WARNING:DO
			BT5633/BT6823 550mAh 3.6V	WARNING:DO BATTERIES PUNCTURE				550mAh 3.6V		PUNCTURE CHINA IN MADE
UP		ORBURNNOTWARNING:DO	PUNCTURE MADE			UPSIDETHIS	BT5633/BT6823 550mAh3.6V		NOWARNING:DO PUNCTURE		MADE
				OR

Step 1

Plug the battery securely into the plug inside the handset battery compartment, matching the color- coded label.

Step 2

Insert the supplied battery with the label THIS SIDE UP facing up as indicated.

Step 3

Align the cover flat against the battery compartment cover, then slide it upwards until it clicks into place.