Appendix
Troubleshooting
CONNECTING...
displays on my cordless handset.
•Ensure that the telephone base is powered up.
•Place the cordless handset in the telephone base for one minute to allow the cordless handset and base to resynchronize channels.
•Move the cordless handset closer to the telephone base. You might have moved out of range.
•Reset the telephone base. Unplug the unit’s electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.
•Other electronic products can cause interference with your cordless phone. Try installing your phone as far away from these types of electronic devices as possible: television sets, VCRs, or other cordless telephones.
The batteries | • | If the cordless handset is in its telephone base or |
will not hold a |
| charger and the charge light does not come on, refer to |
charge. |
| The charge light is off in this Troubleshooting guide. |
| • | Charge the battery in the cordless handset for at least |
|
| 16 hours. For optimum daily performance, return the |
|
| cordless handset to its base when not in use. |
| • | If the battery is depleted, it may take approximately four |
|
| minutes to charge the handset before it can resume |
|
| screen display. |
| • | You may need to purchase a new battery, please refer |
|
| to the Battery installation and charging section of this |
|
| user’s manual. |
| • | Your phone might be malfunctioning. Please refer to |
|
| the Limited warranty section of this user’s manual for |
|
| further instruction. |
48
