AT&T TL71308 user manual Handset locator, Press Handset Locator on the telephone base

Telephone operation

**PAGING**

Handset operation

Handset locator

The handset locator feature is useful if you misplace a handset.

To start the paging tone:

•Press HANDSET LOCATOR at the telephone base. This starts the paging tone at the handset(s) for 60 seconds to help you locate the handset(s).

NOTE: When paging, if you press OFF/CLEAR or MUTE/REMOVE on a handset, the ringer of the handset will be silent but the handset locator feature will not be canceled.

To stop the paging tone:

•Press PHONE/FLASH, SPEAKER, or any dial pad key (0-9, *, or #) on the handset(s).

–OR–

•Press HANDSET LOCATOR on the telephone base.

NOTE: The handset ringer volume also determines the level of the paging tone. If the handset ringer volume level is set to off, that handset will be silent for all calls and paging (page 22).

16