Telephone operation

NOTES:

1.Before the intercom call is answered, you can cancel

the transfer and return to the outside call by pressing

OFF/CLEAR, PHONE/

FLASH, or INT.

2.If the called handset does not answer the intercom call within 100 seconds, or if the other handset is in the directory or call log mode, or if it is on a call, or out of range, the transferring handset will show UNABLE TO CALL TRY AGAIN on its screen and will automatically return to the outside call.

3.You can switch between the intercom call and the outside call by pressing INT on the calling handset. The display will change between INTERCOM and OUTSIDE CALL to indicate which party is active.

4.You can end the intercom

call and return to the outside call by pressing PHONE/FLASH on the transferring handset.

Call transfer using intercom

Use the intercom feature to transfer an outside call from one handset to another. (This feature is not available on model TL71108.)

Models TL71208/TL71308

1.During a conversation with an outside call, press INT. The outside call is automatically placed on hold and TRANSFER TO: is displayed on the screen.

2.Enter a handset number. The screen will show CALLING HANDSET X. The called handset will ring, and its screen will show HANDSET Y IS CALLING.

3.On the ringing handset, press PHONE/FLASH, INT, SPEAKER, or any dial pad key (0-9, * or #) to answer the intercom call. You can now talk without the outside caller hearing the conversation.

4.Press OFF/CLEAR on the calling handset or place it in the telephone base or handset charger to complete the transfer. The calling handset’s screen will show CALL TRANSFERED and the other handset will automatically be connected to the outside call.

21

Page 24
Image 24
AT&T TL71308 user manual Call transfer using intercom, OFF/CLEAR, Phone