Your New Monitor
Connecting Your Monitor & Speakers |
Caution : Turn the power off to the monitor, computer and speakers before connecting or disconnecting the speakers.
1 | Signal cable |
Connect the end of the signal cable to | |
| your computer’s video port. If you are |
| using a Macintosh computer, connect |
| the cable to a Macintosh adapter, and |
| set the pins on your adapter (adapter |
| not included). A |
| computer does not need an adapter. |
2 | Stereo cable |
Connect the stereo cable to the audio | |
| out port on the back of your monitor. |
3 | DC input cable |
Connect this cable to DC output port | |
| on the back of your monitor. |
4 | Left output cable |
Connect this cable to L- input port on | |
| the back of the left side speaker. |
5 |
|
Connect the left output cable from |
right speaker here.
6 | Power port |
Connect the power cord for your | |
| monitor to the power port on the back |
| of the monitor. |
7 | DC output port |
Connect DC input cable here. | |
8 | Power cords |
Plug the power cord for the monitor | |
| and the power cord for your computer |
| into a nearby outlet. |
9 | Stereo- Stereo cable |
Connect the |
the sound card on the your computer.
10 Turn on your computer and monitor. If your monitor displays an image, installation is complete.
11 Install the monitor driver
∙Insert the provided diskette into the A drive.
∙Double click the “install.exe” file.
English 5
