KitchenAid KFP1133 manual Installing the mini-bowl and mini-blade

ASSEMBLINGCMD + SHIFTTHECLICKFOODTO CHANGEPROCESSORCOPY

3	Install the work bowl cover, being sure
	it locks into place.

Installing the mini-bowl and mini-blade

1	Place the mini-bowl inside the work
	bowl over the power shaft. Rotate the

mini-bowl until the tabs on the top edge of the bowl drop into the indents on the top of the work bowl.

2	Insert the drive adapter into the
	mini-blade, and place on the power

shaft. It may be necessary to rotate the blade until it falls into place. Push down firmly on the top of the blade to lock into place.

3	Install the work bowl cover, being sure
	it locks into place.

4	To remove the mini-bowl after
	processing, remove the mini-blade by

pulling straight up on the cap. Then lift the bowl straight up and out, using the two finger grips located along the top edge of the bowl.

12