KitchenAid KFP1133 manual Before first use, Attaching the work bowl, English

ASSEMBLINGCMD + SHIFTTHECLICKFOODTO CHANGEPROCESSORCOPY

Before first use

Before using your Food Processor for the first time, wash all parts and accessories either by hand or in the dishwasher (see “Cleaning the Food Processor” section).

NOTE: Your Food Processor is shipped with the work bowl cover installed on the work bowl, with the mini-bowl inside the work bowl.

IMPORTANT: Place the Food Processor on a dry, level countertop with the controls facing forward. Do not plug in the Food Processor until it is completely assembled.

HELPFUL TIP: See the “Lid Interlock Instructions” for more information on the best way to attach the work bowl and lid for best results.

English

1	Grasp the feed tube on the work bowl
	cover and turn it clockwise to remove it

from the work bowl.

Attaching the wor_k bowl

2 Lift out the mini-bowl.

IMPORTANT: Your Food Processor will not operate unless the work bowl and work bowl cover are properly locked on the base, and the large pusher is inserted to the maximum fill line on the feed tube (approximately halfway down).

Power_ Shaft

1	Place the work bowl on the base,
	aligning the raised portion with the

indentation on the base. The center hole should fit over the power shaft.

2	Grasp the work bowl handle and turn
	the bowl counterclockwise to lock it

on the base.

9