Decorative
Wireless Chime
Models 3035466 (AC-6180), 3196417 (AC-6182), & 3035490 (AC-6186)
This package includes (Style of push button and chime may vary from illustrations):
•Wireless chime
•Wireless push button w/battery
•Hardware pack
You'll need to buy 3 "D" alkaline batteries for the chime. In typical use,
alkaline batteries will last up to three years.
Figure 1
1. Install alkaline type A23 12 volt push button battery. Re- move back of case by pushing in tab on bottom with a small screwdriver (see Figure 1). Make sure battery is oriented properly (See page 4).
2. Install 3 alkaline“D”batteries.
Cover
Mounting
Tabs
Chime |
|
| |
Volume |
| ||
- |
| Jumpers | |
+ | - | ||
Battery | Battery Battery | ||
| |||
+ | - | + | |
|
|
Make sure batteries are oriented properly (see Figure 2).
3.Test range. Temporarily posi- tion chime and push button where you want them mounted. Press push button to verify chime and push button work properly. If chime does not sound, see Troubleshooting.
Figure 2
© 2007 |