LG Electronics EN 61000-3 There is risk of fire or product failure, Oxygen deficiency could occur

Page 5

Safety Precautions

Do not place a heater or other

Do not let the air conditioner

appliances near the power

run for a long time when the

cable.

humidity is very high and a

 

door or a window is left open.

• There is risk of fire, failure of the

• Moisture may condense and wet or

product, and/or electric shock.

damage furnishings.

Do not store of use flammable gas or combustibles near the air conditioner.

•There is risk of fire or product failure.

ENGLISH

Do not use the product in a tightly closed space for a long time.

•Oxygen deficiency could occur.

•Some ventilation by opening window is necessary for the fresh air

Stop operation and close any window in storm or hurricane before the hurricane arrives.

•There is risk of property damage, failure of product, or electric shock.

When flammable gas leaks, turn off the gas and open a window for ventilation before turning the product on. Do not use the telephone or turn switches on or off.

• There is risk of explosion or fire.

Do not open the inlet grill of the product during operation. (Do not touch the electrostatic filter, if the unit is so equipped.)

•There is risk of physical injury, electric shock, or product.

Wax

Thinner

 

Unplug the unit if strange sounds odors or smoke comes from it.

•There is risk of fire, Product faiure, and/or electric shock.

When the product is soaked (flooded or submerged), contact an Authorized Service Center.

• There is risk of electrical shock.

Owner’s Manual 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Room Air Conditioner Table of Contents Be sure not to do Be sure to follow the instruction Safety PrecautionsThere is risk of fire or electric shock There is risk of electric shockShock Explosion, or injury Damage to the product EdgesCould cause personal injury Personal injury Oxygen deficiency could occur There is risk of fire or product failureThere is risk of explosion or fire There is risk of electrical shockThere is risk of fire or electrical shock It may cause a problem for your neighborsBad connection may cause water leakage To avoid vibration or water leakageThis could damage your health Avoid personal injuryProduct There is risk of personal injuryThey may burn or explode Be careful and avoid personal injuryThere is risk of fire or explosion Prior To Operation ServicePreparing For Operation UsageFeatures Symbols Used In This ManualIntroduction IndoorElectrical Safety Operating Instruction Controls Remote Control OperationsGentle Breeze by the Chaos logic Cooling operationDuring Auto Operation Auto operation OptionalDuring Auto Changeover Operation Auto changeover operationOptionalDuring Healthy Dehumidification Operation Fan speed mode is shiftedHealthy dehumidification operation Temperature can be set within a range Close the door of the remote controllerRemote controller still closed. You can Heating operation Heat pump model onlyJet cool operation NEO Plasma Air Purifying Operation only NEO Plasma purification operationOptionalButton is pressed again 2nd F operationSleep mode Additional FeaturesSetting the time Delay start/Pre-set stopVertical Airflow Direction Control Adjust the left/right airflow direction by handForced operation Auto clean OptionalTest operation 22C71.6F 23C73.4F 24C75.2FTo enable function To disable functionAuto restart Helpful informationIndoor Unit Maintenance And ServiceAir conditioner is operating normally when Outdoor UnitAir conditioner may be operating abnormally when TroubleshootingAir conditioner does not start Air conditioner does not cool as it should
Related manuals
Manual 27 pages 36.57 Kb Manual 29 pages 29.82 Kb

EN 61000-3, EN 61000-2 specifications

LG Electronics is committed to delivering cutting-edge technology while ensuring compliance with international standards. Among these standards are the EN 61000-2 and EN 61000-3 norms, which address electromagnetic compatibility (EMC) and are critical in defining how electrical and electronic devices interact with their electromagnetic environment.

EN 61000-2 focuses on the environment within which devices operate. This standard outlines the general requirements for the compatibility of various electrical devices in residential, commercial, and industrial environments. It specifies the necessary electromagnetic interference (EMI) levels to protect devices from disturbances that could impact their functionality. For LG Electronics, adherence to EN 61000-2 means engineering products that minimize the potential for EMI disruptions, thereby ensuring reliable performance in diverse settings.

On the other hand, EN 61000-3 addresses the emission limits for harmonic currents in electrical systems and equipment. It focuses on ensuring that devices do not generate excessive current harmonics that could disrupt the normal operation of other equipment. For LG, compliance with EN 61000-3 involves implementing technologies that reduce harmonic distortion, which improves the overall power quality in electrical systems. This aspect is particularly important for ensuring energy efficiency and enhancing the longevity of both LG products and the systems they are integrated into.

One of the main features of LG’s products that adhere to these standards is the incorporation of advanced filtering technologies. These filters are designed to suppress harmful electromagnetic emissions and ensure that devices operate within permissible limits. Furthermore, LG employs superior circuit designs that prioritize efficient power management, helping to minimize harmonic generation.

Moreover, LG’s commitment to sustainability is reflected in its adherence to these norms. By reducing electromagnetic emissions and improving power quality, LG Electronics not only complies with regulations but also contributes to a greener environment. This aligns with the company’s broader vision of producing environmentally friendly and energy-efficient products.

In summary, LG Electronics continuously invests in technologies that ensure compliance with EN 61000-2 and EN 61000-3 norms. Through advanced filtering solutions and efficient circuit designs, the company demonstrates its dedication to electromagnetic compatibility, reliability, and sustainability, reinforcing its position as a leader in the global electronics market.
Top Page Image Contents