LG Electronics EN 61000-2, EN 61000-3 owner manual There is risk of fire or electrical shock

Page 6

Safety Precautions

Ventilate the product from time to time when operating it together with a stove, etc.

•There is risk of fire or electrical shock.

Take care to ensure that nobody could step on or fall onto the outdoor unit.

•There could result in personal injury and product damage.

Install the drain hose to ensure that water is drained away properly.

•A bad connection may cause water leakage.

Unplug the appliance before performing cleaning or maintenance.

• There is risk of electric shock.

Do not insert hands or other objects through the air inlet or outlet while the air conditioner is plugged in.

•There are sharp and moving parts that could cause personal injury.

Keep level even when installing the product.

•To avoid vibration or water leakage.

90˚

When the product is not be used for a long time disconnect the power supply plug or turn off the breaker.

•There is risk of product damage or failure, or unintended operation.

■Installation

Always check for gas(refrigerant) leakage after installation or repair of product.

•Low refrigerant levels may cause product failure.

Do not install the product where the noise or hot air from the outdoor unit could damage the neighborhoods.

•It may cause a problem for your neighbors.

6Room Air Conditioner

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Room Air Conditioner Table of Contents There is risk of fire or electric shock Safety PrecautionsBe sure not to do Be sure to follow the instruction There is risk of electric shockExplosion, or injury Damage to the product Edges Could cause personal injury Personal injuryShock There is risk of explosion or fire There is risk of fire or product failureOxygen deficiency could occur There is risk of electrical shockBad connection may cause water leakage It may cause a problem for your neighborsThere is risk of fire or electrical shock To avoid vibration or water leakageProduct Avoid personal injuryThis could damage your health There is risk of personal injuryBe careful and avoid personal injury There is risk of fire or explosionThey may burn or explode Preparing For Operation ServicePrior To Operation UsageIntroduction Symbols Used In This ManualFeatures IndoorElectrical Safety Operating Instruction Remote Control Operations ControlsCooling operation Gentle Breeze by the Chaos logicAuto operation Optional During Auto OperationAuto changeover operationOptional During Auto Changeover OperationFan speed mode is shifted Healthy dehumidification operationDuring Healthy Dehumidification Operation Remote controller still closed. You can Close the door of the remote controllerTemperature can be set within a range Heating operation Heat pump model onlyJet cool operation NEO Plasma purification operationOptional NEO Plasma Air Purifying Operation only2nd F operation Button is pressed againSetting the time Additional FeaturesSleep mode Delay start/Pre-set stopAdjust the left/right airflow direction by hand Vertical Airflow Direction ControlTest operation Auto clean OptionalForced operation 22C71.6F 23C73.4F 24C75.2FAuto restart To disable functionTo enable function Helpful informationMaintenance And Service Indoor UnitOutdoor Unit Air conditioner is operating normally whenAir conditioner does not start TroubleshootingAir conditioner may be operating abnormally when Air conditioner does not cool as it should
Related manuals
Manual 27 pages 36.57 Kb Manual 29 pages 29.82 Kb

EN 61000-3, EN 61000-2 specifications

LG Electronics is committed to delivering cutting-edge technology while ensuring compliance with international standards. Among these standards are the EN 61000-2 and EN 61000-3 norms, which address electromagnetic compatibility (EMC) and are critical in defining how electrical and electronic devices interact with their electromagnetic environment.

EN 61000-2 focuses on the environment within which devices operate. This standard outlines the general requirements for the compatibility of various electrical devices in residential, commercial, and industrial environments. It specifies the necessary electromagnetic interference (EMI) levels to protect devices from disturbances that could impact their functionality. For LG Electronics, adherence to EN 61000-2 means engineering products that minimize the potential for EMI disruptions, thereby ensuring reliable performance in diverse settings.

On the other hand, EN 61000-3 addresses the emission limits for harmonic currents in electrical systems and equipment. It focuses on ensuring that devices do not generate excessive current harmonics that could disrupt the normal operation of other equipment. For LG, compliance with EN 61000-3 involves implementing technologies that reduce harmonic distortion, which improves the overall power quality in electrical systems. This aspect is particularly important for ensuring energy efficiency and enhancing the longevity of both LG products and the systems they are integrated into.

One of the main features of LG’s products that adhere to these standards is the incorporation of advanced filtering technologies. These filters are designed to suppress harmful electromagnetic emissions and ensure that devices operate within permissible limits. Furthermore, LG employs superior circuit designs that prioritize efficient power management, helping to minimize harmonic generation.

Moreover, LG’s commitment to sustainability is reflected in its adherence to these norms. By reducing electromagnetic emissions and improving power quality, LG Electronics not only complies with regulations but also contributes to a greener environment. This aligns with the company’s broader vision of producing environmentally friendly and energy-efficient products.

In summary, LG Electronics continuously invests in technologies that ensure compliance with EN 61000-2 and EN 61000-3 norms. Through advanced filtering solutions and efficient circuit designs, the company demonstrates its dedication to electromagnetic compatibility, reliability, and sustainability, reinforcing its position as a leader in the global electronics market.
Top Page Image Contents