LG Electronics EN 61000-2 Be careful and avoid personal injury, They may burn or explode

Page 8

Safety Precautions

Do not drink the water drained from the unit.

•It is not sanitary and could cause serious health issues.

Use a firm stool or ladder when cleaning or maintaining the air conditioner.

•Be careful and avoid personal injury.

Replace all the batteries in the remote.

• There is risk of fire or explosion.

■Disuse

Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire.

• They may burn or explode.

If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water.

Do not use the remote if the batteries have leaked.

•The chemicals in batteries could cause burns or other health hazards.

If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if the batteries have leaked.

•The chemicals in batteries could cause burns or other health hazards.

8Room Air Conditioner

Image 8

Contents Room Air Conditioner Table of Contents Safety Precautions Be sure not to do Be sure to follow the instructionThere is risk of fire or electric shock There is risk of electric shockShock Explosion, or injury Damage to the product EdgesCould cause personal injury Personal injury There is risk of fire or product failure Oxygen deficiency could occurThere is risk of explosion or fire There is risk of electrical shockIt may cause a problem for your neighbors There is risk of fire or electrical shockBad connection may cause water leakage To avoid vibration or water leakageAvoid personal injury This could damage your healthProduct There is risk of personal injuryThey may burn or explode Be careful and avoid personal injuryThere is risk of fire or explosion Service Prior To OperationPreparing For Operation UsageSymbols Used In This Manual FeaturesIntroduction IndoorElectrical Safety Operating Instruction Remote Control Operations ControlsCooling operation Gentle Breeze by the Chaos logicAuto operation Optional During Auto OperationAuto changeover operationOptional During Auto Changeover OperationDuring Healthy Dehumidification Operation Fan speed mode is shiftedHealthy dehumidification operation Close the door of the remote controller Temperature can be set within a rangeRemote controller still closed. You can Heating operation Heat pump model onlyJet cool operation NEO Plasma purification operationOptional NEO Plasma Air Purifying Operation only2nd F operation Button is pressed againAdditional Features Sleep modeSetting the time Delay start/Pre-set stopAdjust the left/right airflow direction by hand Vertical Airflow Direction ControlAuto clean Optional Forced operationTest operation 22C71.6F 23C73.4F 24C75.2FTo disable function To enable functionAuto restart Helpful informationMaintenance And Service Indoor UnitOutdoor Unit Air conditioner is operating normally whenTroubleshooting Air conditioner may be operating abnormally whenAir conditioner does not start Air conditioner does not cool as it should

Related manuals

Manual 27 pages 36.57 Kb

Manual 29 pages 29.82 Kb

EN 61000-3, EN 61000-2 specifications

LG Electronics is committed to delivering cutting-edge technology while ensuring compliance with international standards. Among these standards are the EN 61000-2 and EN 61000-3 norms, which address electromagnetic compatibility (EMC) and are critical in defining how electrical and electronic devices interact with their electromagnetic environment.

EN 61000-2 focuses on the environment within which devices operate. This standard outlines the general requirements for the compatibility of various electrical devices in residential, commercial, and industrial environments. It specifies the necessary electromagnetic interference (EMI) levels to protect devices from disturbances that could impact their functionality. For LG Electronics, adherence to EN 61000-2 means engineering products that minimize the potential for EMI disruptions, thereby ensuring reliable performance in diverse settings.

On the other hand, EN 61000-3 addresses the emission limits for harmonic currents in electrical systems and equipment. It focuses on ensuring that devices do not generate excessive current harmonics that could disrupt the normal operation of other equipment. For LG, compliance with EN 61000-3 involves implementing technologies that reduce harmonic distortion, which improves the overall power quality in electrical systems. This aspect is particularly important for ensuring energy efficiency and enhancing the longevity of both LG products and the systems they are integrated into.

One of the main features of LG’s products that adhere to these standards is the incorporation of advanced filtering technologies. These filters are designed to suppress harmful electromagnetic emissions and ensure that devices operate within permissible limits. Furthermore, LG employs superior circuit designs that prioritize efficient power management, helping to minimize harmonic generation.

Moreover, LG’s commitment to sustainability is reflected in its adherence to these norms. By reducing electromagnetic emissions and improving power quality, LG Electronics not only complies with regulations but also contributes to a greener environment. This aligns with the company’s broader vision of producing environmentally friendly and energy-efficient products.

In summary, LG Electronics continuously invests in technologies that ensure compliance with EN 61000-2 and EN 61000-3 norms. Through advanced filtering solutions and efficient circuit designs, the company demonstrates its dedication to electromagnetic compatibility, reliability, and sustainability, reinforcing its position as a leader in the global electronics market.