Before to Operation
Before Operation
Preparing
for
operation
1.Plug in the power plug properly.
2.Use a dedicated circuit. Overloading the line could create a fire hazard.
3.Do not use an extension cord. See page 10 for more details.
4.Do not start/stop operation by plugging/unplugging the power cord.
5.If the power cord is damaged and requires replacement, have an Authorized Servicer install an exact replacement part.
ENGLISH
Usage
1.Being exposed to direct airflow for an extended period of time could be hazardous to your health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time.
2.Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or other heating devices.
3.Do not use this air conditioner for
4.The air conditioner is a consumer comfort appliance, not a precision climate control system.
Cleaning
and
maintenance
1.Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling sharp metal edges.
2.Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation, leading to possible electric shock.
3.When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates at a very high speed during operation. There is a possibility of injury if the unit’s power is accidentally triggered on while cleaning inner parts of the unit.
Service
For repair and maintenance, contact an Authorized Service Center. See the warranty page for details or call (800)
Owner’s Manual 7