LG Electronics LT1030C, LT0810C, LT1230H, LT1010C Operating Instructions, Controls Cooling Only

Operating Instructions

Operating Instructions

The controls will look like one of the following:

Controls–CoolingOnly

Operation				Off	- Turns air conditioner off.
				Med Fan	- Med speed fan operation without cooling.
	Off
Med			High	Low Fan	- Low speed fan operation without cooling.
				High Cool - Cooling with high speed fan operation.
Fan			Cool	Med Cool	- Cooling with med speed fan operation.
				Low Cool	- Cooling with low speed fan operation.
Low			Med
Fan	Low Cool		Cool
Thermostat				This automatically controls the temperature of the indoor air.
		C
		o
	5	ol		Turn the knob so that arrow points to the larger marks for
			e
4		6	r	greater cooling. Point the arrow to the smaller marks for more
3			7	moderate cooling.
				(i.e. the higher number, the greater cooling)

28

1 9

ENGLISH

454-7822

• FOR NORMAL COOLING

1.Turn the Operation Knob to the High Cool from the Low Cool setting.

2.Set the Thermostat control to the desired temperature mark 5 (the mid-point is a good starting position). If the room temperature is not satisfactory after a reasonable time, adjust the control to a cooler or warmer setting, as appropriate.

• FOR MAXIMUM COOLING

1.Turn the Operation Knob to the High Cool setting.

2.Set the Thermostat control to the largest 9 temperature mark.

• FOR QUIETER OPERATION

1.Turn the Operation Knob to the Low Cool setting.

2.Set the Thermostat control as needed.

• ENERGY SAVER (optional)

On : Both the fan and the compressor turn on and turn off together while operation knob is set to the Cool position.

You can get the more economical operation.

Off : The fan runs constantly while operation knob is set to the Cool position.

Energy Saver

Off On

You can access the Energy Saver switch when you open the inlet grille.

DIRECT SALES (877)

Owner’s Manual 11

PTAC