LG Electronics LT1230C, LT0810C, LT1230H, LT1010C, LT1030H Controls Cooling & Heating, Operation

Operating Instructions

The controls will look like one of the following:

Controls–Cooling&Heating

Operation	Off	(	o ) :Turns the air conditioner off.
O
	Fan	(	) : The low fan speed operation without cooling
			(heating).
	Low Cool	(	) : Cooling with the low speed fan operation.
	High Cool	(	) : Cooling with the high speed fan operation.
	Low Heat	(	) : Heating with the low speed fan operation.
	High Heat	(	) : Heating with the high speed fan operation.

Thermostat	Turn the thermostat control to the desired setting. The central position
	is a normal setting for average conditions. You can change this setting,
	if necessary, in accordance with your temperature preference.
	The thermostat automatically controls cooling or heating, but the fan
	runs continuously whenever the air conditioner is in operation. If the
	room is too warm, turn the thermostat control clockwise. If the room is
	too cool, turn the thermostat control counterclockwise.

WarmerCooler

7822

• THE AIR CONDITIONER

This automatically controls the temperature of the indoor air.

The compressor will turn on and off to keep the room at the setting temperature.

In the heating operation, the electric heater will turn on and off to keep the room at the setting temperature.

CAUTION: When the air conditioner has been performed its cooling or heating operation and is turned off or set to the fan position, wait at least 3 minutes before resetting to the cooling operation again.

• HEAT PUMP MODELS

When the outdoor temperature is lower than

-4°C (24°F), the electric heater will turn on instead of the heat pump.

A slight heat odor may come from the unit when first switching to HEAT after the cooling season is over. This odor, caused by fine dust particles on the heater, will disappear quickly. This is harmless.

DIRECT SALES (877) 454-

12Room Air Conditioner

PTAC