ZyXEL Communications AG-225H manual LCM Description, Basic Operation

ZyXEL AG-225H User’s Guide

1.3LCM Description

Detect Mode

Display up to 15 detected networks in the order of the

signal strength

Display the detected networks without any security setting (free hot spot).

Display the dedicated network you choose to use

Security Information

WEP security is enabled.

WPA security is enabled. Wireless security is disabled (no security)

Signal

Indicate A/B/G World Wide Radio Band.

Entry

Display the current entry of the detected Access Points. Users can detect up to 15 networks at one time.

Channel

Display the radio channel of the detected network.

SSID

The SSID identifies the Service Set to the network users detect. When the length of SSID is longer than 12 characters, it will be scrolled horizontally.

5 levels of signal strength.

802.11a mode at 5 GHz band

802.11b mode at 2.4 GHz band 802.11g mode at 2.4 GHz band

Power

Display Low Battery

Display Full Battery

1.4Basic Operation

Follow the instructions in the Quick Start Guide to know how to operate AG-225H Wi-Fi Finder Mode.

1.5ZyXEL AG-225H Adapter Hardware and Utility Installation

Follow the instructions in the Quick Start Guide to install the ZyXEL Utility and make hardware connections.

1.6Using the ZyXEL Utility to Configure Your Network

The following are explanations on how to configure and use the ZyXEL Utility program. For initial setup, please see the included Quick Start Guide.

1-2 Getting Started