Honeywell MK VIII, MK XXII manual Egpws Line Maintenance Manual, Self-TestLevel 1 ”Airspeed Low”

EGPWS LINE MAINTENANCE MANUAL

18 APPENDIX H: LOW AIRSPEED MONITOR MAINTENANCE MESSAGES

TABLE H-1: LOW AIRSPEED MONITOR MAINTENANCE MESSAGES

MAINT.

FUNCTION

MESSAGE

Except where noted, all maintenance message voices are Male

NOTES:

All volume levels at same volume as existing EGPWS Self-Test messages

Self-Test Level 1 ”Airspeed Low”

Self-Test Level 1 “Airspeed Low Inhibited”

Self-Test Level 1 “Airspeed Low INOP”

Self-Test Level 3 “Airspeed Low Inhibited” (Annunciated at

end of Selected Options )

Low Airspeed Monitor enabled, functioning, has all required input information.

Low Airspeed Monitor enabled, but the advisory have been inhibited via aircraft wiring.

Low Airspeed Monitor enabled but the function is inoperative.

Low Airspeed Monitor enabled, but the advisory have been inhibited via aircraft wiring.

NOTE: Operators/Installers must refer to their Instructions for Continued Airworthiness (ICA) documentation to identify the approved configurations specific to their aircraft type/model having Low Airspeed Monitor installed.

CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO.: 060-4199-180 REV: G SHEET 68 of 68