Honeywell MK VI Gnd Landing Flap Discrete Or Flap Override, Egpws Line Maintenance Manual

Models: MK VIII MK V MK XXII MK VII MK VI

1 68
Download 68 pages 50.96 Kb
Page 39
Image 39
3.8.4 GND LANDING FLAP DISCRETE OR FLAP OVERRIDE

 

EGPWS LINE MAINTENANCE MANUAL

3.8.4 GND LANDING FLAP DISCRETE OR FLAP OVERRIDE

Type:

Supplied by Flap or Flap selector handle switch. This input can be paralleled with, or used

 

exclusively by a Flap Override Switch if an alternate source of Flap Position is used.

Signal Status: Landing Flaps or Not Landing Flaps

Fault monitoring: Indication of landing flaps selected for more than 60 seconds at airspeeds above 250 knots will result in a flap switch fault which will cause a GPWS INOP indication.

Note: This can be caused either by a flap switch fault or by the Flap Override switch being left in the on position.

Level 6 Audio readout

GND Landing Flaps Discrete

Selected =>

“Flaps Selected”

or Flap Override

Not Selected =>

“Flaps Not Selected”

Note: If Flap Reversal Program Pin is enabled for MK VII EGPWC, the Audio readout will be:

Level 6 Audio readout

GND Landing Flaps Discrete

Selected =>

“Flaps Selected”

or Flap Override

Not Selected =>

“Flaps Not Selected”

3.8.5 +28V LANDING FLAP OR FLAP OVERRIDE DISCRETE

Type:

Supplied by Flap or Flap selector handle switch. This input can be paralleled with, or used

 

exclusively by a Flap Override Switch if an alternate source of Flap Position is used.

Signal Status:

Landing Flaps or Not Landing Flaps

Fault monitoring: Indication of landing flaps selected for more than 60 seconds at airspeeds above 250 knots will result in a flap switch fault which will cause a GPWS INOP indication.

Note: This can be caused either by a flap switch fault or by the Flap Override switch being left in the on position.

 

Level 6 Audio readout

+28 V Landing Flaps Discrete

Selected =>

“28V Flaps Selected”

or Flap Override

Not Selected =>

“28V Flaps Not Selected”

Note: If Flap Reversal Program Pin is enabled for MK VII EGPWC, the Audio readout will be:

Level 6 Audio readout

GND Landing Flaps Discrete

Selected =>

“Flaps Selected”

or Flap Override

Not Selected =>

“Flaps Not Selected”

CAGE CODE: 97896

SCALE: NONE SIZE: A DWG NO.: 060-4199-180

REV: G

SHEET 39 of 68

Page 39
Image 39
Honeywell MK VIII Gnd Landing Flap Discrete Or Flap Override, 3.8.5 +28V LANDING FLAP OR FLAP OVERRIDE DISCRETE