LG Electronics MPB3328CNE Maintenance, Front Glass Enclosure Panel, Removal and Installation

Page 7

 

Wire

 

Termianls

 

Cabinet

 

Corner

 

Back Of

 

Limit

 

Switch

 

Door

 

Frame

Detail A

 

 

Lintel Securing Screw

Fire Box Top

Hole in Cabinet Top

 

Scoop

Scoop Securing Screws

Detail B

 

 

Lintel Securing-Screw

Fire Box Top

Hole in Cabinet Top

Limit/Bracket

Securing Screws

 

Limit

Detail C

 

Blocked Flue Safety Limit Location

Inside View of Firebox -

Top/Right Side Intersection

Figure 5

 

Maintenance

The appliance and venting system should be thoroughly inspected before initial use and at least annually by a qualified service technician. However, more frequent periodic inspections and cleanings should be performed by the ho- meowner. Homeowner must contact a qualified service technician at once if any abnormal condition is observed.

WARNING

Turn off gas and electrical power before servicing the appliance.

Refer to the maintenance schedule for main- tenance tasks, procedures, periodicity and by whom they should be performed. Always verify proper operation of the appliance after servicing.

IMPORTANT: TURN OFF GAS AND ANY ELECTRICAL POWER BEFORE SERVICING THE APPLIANCE.

Front Glass Enclosure Panel, Removal and Installation.

WARNING

Never operate the appliance with- out the glass enclosure panel in place and secure. Do not operate appliance with the FRONT glass panel cracked, broken or missing. Replacement panels are available through your local LENNOX Dealer and must be installed by a licensed or qualified service technician.

These appliances are designed to operate only with the front glass enclosure panel properly installed. Generally, the glass enclosure panel should not be removed except to gain access to the components within the firebox, and the appliance may only be operated without the front glass enclosure panel in place for very brief periods of time during initial appliance checkout and adjustment.

During this appliance checkout and adjust- ment period, a potential safety hazard exists

-EXERCISE EXTREME CAUTION to prevent the occurrence of any burn injuries from the exposed flames or hot surfaces. Also note, that while the front glass enclosure panel is removed, the flame appearance will appear to be smaller than normal.

WARNING

Handle the glass with extreme care! Tempered glass is susceptible to damage (scratches, for example)

–Handleglassdoor(glassenclosure panel) gently while reinstalling it.

WARNING

Donotattempttosubstitutethemate- rials used on this door, or replace cracked or broken glass with any materials other than those provided by the appliance manufacturer.

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

IMPORTANT

Theglassdoorofthisappliancemust onlybereplacedasacompleteunitas providedbythemanufacturer. Donot attempt to replace broken, cracked or chipped glass separately.

Refer to Figure 6 and remove the front glass enclosure panel as follows:

1.Remove the top louver assembly or radiant panel.

2.Open the hinged drop-down control compart- ment access panel.

3.Locate the latch at the top of the control compartment and disengage it from the door frame bottom Vee-flange, pulling down on its handle to open it.

4.Swing the bottom of the door out and raise it slightly to lift the top flange of the door frame away from the appliance.

 

Top Flange

 

Door Frame

Latch

Glass Door

 

Bottom Vee-flange

 

Door Frame

Firebox Floor

Figure 6

 

To install the front glass enclosure panel, proceed as follows:

1.Retrieve the glass door frame. Visually inspect the gasket on the backside of the panel. The gasket surface must be clean, free of irregularities and seated firmly.

2.Position the door frame in front of the firebox opening and engage the top flange over the lip at the top of the firebox opening.

3.Swing the door down and back. Ensure the gasket seats evenly as the door draws shut. Engage the Vee-flange at the bottom of the door with the latch and close the latch to secure the door.

4.Reinstall the top louver assembly or radiant panel.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents MPB3328CPM MPB4035CNM MPB3530CNE Retain These Instructions For Future Reference875,031M REV. a 02/2006 MPB3328CNM MPB3530CPM MPB3328CNECongratulations Table of ContentsFor the location of the piezo Igniter Gas Controls/Control Compartment AccessOperation and Care of Your Appliance Millivolt AppliancesManifold Pressure Port Variable Flame Height Adjustment Millivolt Appliances onlyElectronic Appliances Inlet Pressure PortLight the appliance Wait 15 minutes Spillage Test and Safety Limit Switch OperationOutside Combustion Air Controls Outside Air Control LeverWhile HOT Maintenance Task Accomplishing Person ProcedureFront Glass Enclosure Panel, Removal and Installation MaintenanceReinstall the top louver assembly or radiant panel Electronic Appliance Checkout Burner Adjustments Burner Air Shutter AdjustmentElectronic Pilot Assembly SIT Millivolt Appliance CheckoutInitial Installation Considerations Log PlacementReference LOG SET MPB-3328 LOG PlacementCatalog Number 24M1501 Catalog Number 24M2201 MPB-3530 LOG PlacementCatalog Number 24M2501 MPB-4035 & MPB-4540 LOG PlacementLHP WarrantyReplacement Parts Product Reference InformationAccessory Components Polished Brass & Brushed Stainless 2-Piece Door Frame Kits Arch Door KitsBrickaded Panel Liner Kit Piece Polished Brass and Brushed Stainless Louvers Kits4-Piece Trim Kits Accessory ComponentsPiece Trim KitSunrise Decorative Arch Screen Panel KitWhat to do if YOU Smell GAS Access the lower control compartmentTurn remote wall switch to OFF To Turn OFF GAS to ApplianceDE GAZ Instructions D’ALLUMAGE Vanne GAZ Millivolt SITInstructions Dallumage PIEZO-ELECTRIQUETo Shut OFF Lighting Instructions ElectronicWhat to do if YOU Smell GAS Lighting InstructionsPour Fermer LE GAZ QUI Alimente L’APPAREIL Instructions D’ALLUMAGE ElectronicInstructions D’ALLUMAGE Pour Éteindre L’APPAREILSymptom Possible Causes Corrective Action YES StartGas Controls Honeywell Electronic Gas Controls SIT Millivolt154 Replacement PartsPage 875,031M REV. a 02/2006

MPB3328CNE specifications

The LG Electronics MPB3328CNE is a premium product that showcases the company’s commitment to innovation and cutting-edge technology. This model is designed to meet the demands of modern consumers while offering a range of features that enhance usability and efficiency.

At the heart of the MPB3328CNE is its advanced energy management system. This feature is crucial in today’s environmentally conscious market, allowing users to reduce energy consumption while still enjoying high-performance output. The model boasts an impressive energy efficiency rating, ensuring it operates effectively without compromising on quality.

One of the main highlights of the MPB3328CNE is its display technology. The unit incorporates LG's renowned IPS panel, which delivers stunning visuals with accurate colors and wide viewing angles. This is particularly beneficial for multimedia applications, as it provides a vibrant and immersive experience whether for entertainment or professional use.

Additionally, the MPB3328CNE is equipped with smart technology that allows for seamless connectivity. Users can easily link their devices through various wireless protocols, including Wi-Fi and Bluetooth. This capability enhances the overall user experience, facilitating quick access to content and broadening the scope of what the device can accomplish.

The design of the MPB3328CNE is both sleek and functional. It features a minimalist aesthetic that fits well in any environment, from home to office settings. The intuitive interface further simplifies navigation, making it accessible for users of all technical skill levels.

Furthermore, safety features are a priority, as the MPB3328CNE includes safeguards against overheating and power surges. This adds a layer of security and peace of mind for users, ensuring that the device operates safely and prolongs its lifespan.

In conclusion, the LG Electronics MPB3328CNE is a well-rounded product that emphasizes energy efficiency, advanced display technology, and seamless connectivity. With its innovative features and reliable performance, it is a compelling choice for consumers looking to enhance their multimedia experience while remaining environmentally responsible. This model reflects LG's dedication to providing high-quality electronics that adapt to the needs of modern users.
Top Page Image Contents