Utilisation du Bec Électrique, Brosse à Épousseter

Compartiment de

rangement Fig. 10

Fig. 11

Commande de succion variable

CONSIGNES D’UTILISATION

OPERATING INSTRUCTIONS

Utilisation du Bec Électrique

1.Pour attacher le bec électrique au tube télescopique, insérez-le tube dans le réceptacle du bec électrique. (Fig. 8)

	Relâche du
	tube	Fig. 8
	télescopique	Fig. 8
	télescopique

2.Appuyez sur le sélecteur de hauteur de tapis pour régler la hauteur du batteur. Il y a quatre (4) hauteurs différentes de tapis. (Fig. 9)

3.À chaque pression sur la pédale, la fenêtre de sélection de hauteur de tapis change de couleur.

-Bleu : Ultra court

-Vert : Court

-Jaune : Moyen

-Blanc : Long

	Sélecteur de	Fig. 9
	hauteur de	Fenêtre du
	tapis	Fenêtre du
	tapis	sélecteur de
		hauteur de tapis

4.Pour retirer le tube télescopique du bec électrique, appuyez sur la relâche du tube télescopique et retirez le tube. (Fig. 8)

Compartiment de Rangement d'outils

Votre aspirateur est doté d'un compartiment de rangement pour le suceur

plat, la brosse à meubles et

la brosse à épousseter. (Fig. 10)

Brosse à Épousseter

La brosse à épousseter s’utilise sur les meubles.

Suceur Plat

Pour radiateurs, fissures, coins, plinthes et entre les coussins.

Brosse à Meubles

La brosse à meuble est utilisée sur les meubles. Sa surface unique

en fait un excellent outil pour éliminer les poils d'animaux. Remarque: Cet outil n’est pas un appareil de toilettage et ne doit pas être utilisé sur les animaux.

Commande de Succion Variable

La commande de succion variable située sur le dessus de l'appareil est recommandée pour les travaux légers tels les rideaux ou les surfaces fines qui ne nécessitent pas une succion puissante.

La commande de succion variable vous permet d'augmenter ou de réduire la force de succion selon la tâche de nettoyage. Augmentez la succion lorsque vous nettoyez les tapis et réduisez-la lorsque vous époussetez les meubles ou les rideaux.

1. Pour réduire le niveau de succion, faites glisser le bouton de commande de succion variable vers la gauche.

2. Pour revenir au mode de succion puissante, faites glisser le bouton à la droite jusqu'à ce qu'il s'arrête. (Fig. 11)

Faible

Élevée

Using Your Vacuum

1.Insert the power plug into the wall outlet.

2.Press the Power On/Off button located on the unit to turn the vacuum cleaner “On”. (Fig. 12)

On/Off Power
Button	Yellow Mark
	Yellow Mark
	Red Mark
Fig. 12

3.To rewind the power cord, press the cord rewind button with one hand and guide the power cord with the other hand to ensure that it does not whip causing damage or injury.

Note: Once all attachments are in place, unwind a sufficient length of cable and insert the plug into the wall outlet. A yellow mark on the power cord shows the ideal cable length. Don't pull the power cord beyond the red mark. (Fig. 12)

Power Cord

Your vacuum cleaner includes a power cord which is automatically retractable. To extend your power cord, pull from rear and extend to desired length up to the yellow mark on the power cord. (Fig. 12) Do not pull the power cord beyond the red mark. When vacuuming is finished, first switch off power and disconnect plug from electrical outlet. Then press on cord rewind button. If the cord does not fully retract, pull it out again and then press on cord rewind button.

Warning: Hold the plug when rewinding the cord. Do not allow the cord to whip when rewinding.

Note: Before using the appliance, unwind a sufficient length of cable and Insert the plug into the wall socket. A yellow mark on the power cord shows the ideal cable length. Don’t pull the power cord beyond the red mark.

Dust Bag Full Indicator

The dust bag full indicator may turn on while you are cleaning to indicate that the HEPA dust bag is full and requires replacement or if there is a blockage in the hose.

Note: You can test the dust bag full indicator by placing your hand over the end of the flexible hose when the vacuum is running. The dust bag full indicator should turn red.

Warning: To reduce the risk of electric shock, the power cord must be disconnected before removing the dust bag cover, the HEPA dust bag, the filters or performing maintenance/trouble shooting checks.

Motor Thermostat

Important: This unit is equipped with a motor protective thermostat. If for some reason the vacuum cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur:

•Push the On/Off button once.

•Disconnect the plug from the power source.

•Check the source of overheating problem. (i.e. clogged hose or filter.)

•If clogged hose or filter is found, unclog the hose and replace the filters.

•Wait at least 45 minutes before attempting to reuse the vacuum.

•After unit has cooled down for 45 minutes, plug in the cleaner and push the On/Off button. The vacuum should start again.

•If the vacuum still does not start, contact customer service at

1 (800) 798-7398.

EP754 specifications

The Shark EP754 is a remarkable upright vacuum cleaner that has quickly gained popularity for its exceptional performance and innovative features. Designed with the modern home in mind, this vacuum offers a perfect blend of power, versatility, and convenience, making it an ideal choice for pet owners and busy households alike.

One of the standout features of the Shark EP754 is its powerful suction capability. Equipped with advanced cleaning technologies, including Shark’s signature DuoClean technology, this vacuum is adept at picking up debris from both carpets and hard floors. The DuoClean system utilizes two brush rolls that work in unison – one to engage with the surface for deep dirt extraction and the second to capture large debris and entrap dust.

Another notable characteristic of the Shark EP754 is its self-cleaning brush roll. This feature addresses a common issue faced by many vacuum users: hair entanglement. The self-cleaning mechanism actively removes hair wraps, ensuring optimal performance without the hassle of manual hair removal, making it particularly advantageous for pet owners.

Portability and ease of use are also central to the design of the Shark EP754. It features a lightweight build and a flexible steering system that allows for effortless maneuverability around furniture and tight spaces. The vacuum’s ergonomic design includes a comfortable grip handle, which reduces strain during extended cleaning sessions.

For added versatility, the Shark EP754 comes with a variety of attachments tailored for different cleaning tasks. Included in the package are a crevice tool, dusting brush, and pet power brush, enabling users to tackle everything from upholstery to stairs with ease. The convenient detachable canister also allows for a quick transition between upright and handheld cleaning modes, enhancing its practicality.

Moreover, the vacuum incorporates a HEPA filtration system, which captures 99.9% of allergens and dust particles, making it an excellent choice for allergy sufferers. The sealed system ensures that dust and allergens are contained within the vacuum, preventing them from returning to the air.

In conclusion, the Shark EP754 stands out as a powerful, versatile, and convenient vacuum cleaner. With its advanced technologies, such as DuoClean and self-cleaning brush roll, coupled with its lightweight design and effective filtration, it offers a comprehensive cleaning solution for homes of all sizes. Whether dealing with pet hair, dirt, or allergens, the Shark EP754 delivers outstanding performance and ease of use, making it a top choice for consumers seeking a premium vacuuming experience.