Shark NV350Q Maintenance cont’d, Component Maintenance Schedule, Cleaning the PRE-MOTOR Filters

Page 14

Maintenance - cont’d

 

 

COMPONENT

MAINTENANCE SCHEDULE

 

1

Dust Cup

Empty each time you vacuum.

 

 

 

 

 

 

2

Pre-Motor Foam Filter

Rinse and air dry every 3 months under normal use.

 

 

 

 

 

 

3

Pre-Motor Felt Filter

Rinse and air dry every 3 months under normal use.

 

 

 

 

 

 

4

Post-Motor HEPA Filter

Clean once every 2 years or as needed.

 

 

 

 

 

Pre-Motor

Foam Filter

Felt Filter

Post Motor

HEPA Filter

Fig. 25

CLEANING THE PRE-MOTOR FILTERS

1Remove the dust cup.

2Pull the 2 filters out from the top of the motor base. (Fig. 25)

3Rinse the filters thoroughly in lukewarm water until the water runs clear.

DO NOT put the filter in the washing machine or dishwasher.

NOTE: The material in the filter will discolor over time. This is NORMAL and will not affect the performance of the filter.

4Squeeze out excess water and let air-dry for at least 24 hours before replacing. Do not use a hair dryer or other heating methods to dry.

5Place the felt filter in first, then the foam filter.

6Replace the dust cup.

14

Fig. 26

Fig. 28

Fig. 27

CLEANING THE POST-MOTOR HEPA FILTER

1Remove the filter cover from the front of the vacuum by pulling up on the tab and pulling the cover away from the vacuum. (Fig. 26)

2Take out the HEPA filter by pulling it straight out.

3Turn the filter over so that the dirty side is on the bottom and vigorously tap it clean against a garbage can to remove any dust. (Fig. 27)

4Wash the filter under the tap using lukewarm water with the dirty side face down until the water runs clear. (Fig. 28)

DO NOT put the filter in the washing machine or dishwasher.

NOTE: The material in the filter will discolor over time. This is NORMAL and will not affect the performance of the filter.

5Allow the filter to air dry for 24 hours. Do not use a hair dryer or other heating methods to dry.

6Once the HEPA filter is dry, replace it back into the vacuum.

7Replace the cover by inserting the two tabs into the holes at the top and then swinging the cover down until it clicks into place.

NV350Q_26_IB_ENG_101019.indd 14

10-10-19 9:19 AM

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Owner’s guide Important Safety Instructions Hose Attachments Do not use without dust cup and/or filters in placeVoltage 120V., 60Hz Watts 1200W Amps 10A Technical SpecificationsNV350Q Contents Getting Started Modes Upright VAC Detachable CanisterPlace the floor nozzle on a level surface Mode 1 Upright VacTo Assemble To USE = OFFMode 2 Detachable Canister Above-Floor Cleaning With Floor Nozzles Clean the Floor in Detachable Canister ModeAssembling the Duster Line dry or dry on a low dryer settingDuster with Micro Storing Fiber Pad Keeping Your MICRO-FIBER Duster PAD AS Good AS NEWDo not operate the vacuum with WET filters MaintenanceReassemble all parts securely before operating vacuum Emptying the Dust CUPCleaning the PRE-MOTOR Filters Maintenance cont’dComponent Maintenance Schedule Cleaning the POST-MOTOR Hepa FilterCleaning the Turbo Brush Cleaning the Motorized Floor BrushDust cup may be full. Empty dust cup Ensure that all the filters are cleanChecking for Blockages Troubleshooting Guide NV350Q26IBENG101019.indd 10-10-19 919 AM EURO-PRO FIVE-YEAR 5 Limited Warranty NV350Q26IBENG101019.indd 10-10-19 919 AM

NV350Q specifications

The Shark NV350Q is a versatile and powerful upright vacuum cleaner designed for home use, particularly effective on both carpets and hard floors. This model incorporates advanced features and technologies that enhance its performance and ease of use, making it a popular choice among consumers.

One of the standout features of the Shark NV350Q is its Lift-Away technology. This innovation allows users to detach the canister from the upright vacuum, making it easy to clean stairs, furniture, and other hard-to-reach areas without struggling to maneuver the entire machine. The lightweight design of the detachable canister further enhances its portability and convenience.

The NV350Q is equipped with a powerful motor and advanced suction capabilities, ensuring that it effectively picks up dirt, dust, and debris from various surfaces. It features a TruePet motorized brush attachment designed specifically for pet owners. This brush is ideal for removing pet hair from carpets, upholstery, and other surfaces, ensuring a thorough clean every time.

Another important characteristic is the inclusion of a HEPA filter, which traps allergens and dust particles, making the vacuum an excellent choice for allergy sufferers. The filter is washable and reusable, which not only contributes to the longevity of the machine but also supports more environmentally friendly practices by reducing waste.

The advanced brush roll technology incorporated into the NV350Q provides versatility in cleaning. The brush roll can easily transition between carpet and hard floor modes, optimizing cleaning performance. Users can control the suction power with adjustable settings, allowing for a customized cleaning experience based on surface type and debris level.

Additionally, the NV350Q comes with a variety of accessories, including a crevice tool, dusting brush, and an upholstery tool, making it adaptable for different cleaning tasks. The vacuum's large capacity dust cup reduces the frequency of emptying, enhancing user convenience during extended cleaning sessions.

The Shark NV350Q stands out due to its combination of power, versatility, and innovative features, making it an excellent choice for anyone looking to maintain a clean and healthy home environment. With its thoughtful design and practical technologies, this vacuum effectively meets the diverse cleaning needs of today's households.
Top Page Image Contents