Leakage Checkpoints

Read this manual first. Then before checking the water heater make sure the electrical power supply has been turned “OFF” before checking the tank for leakage.

*A. Condensation and dripping may be seen on pipes if the water temperature is low in humid weather or pipe connections may be

	leaking.
	B. Small amounts of water from temperature-pressure relief valve
	may be due to thermal expansion or high water pressure in your
	area. If the valve is not piped to an open drain the released water
	could be mistaken for a leaking heater.
	*C. The temperature-pressure relief valve may be leaking at the tank
	fitting.
	E. The element may be leaking at the tank fitting. Turn electrical power
	“OFF”, remove outer door, insulation block and pad. If leaking
	around the element, follow proper draining instructions and remove
	element. Reposition or replace gasket on element. Place element
	into opening and tighten securely. Then follow “Filling the Water
	Heater” instructions in the “Installing the New Water Heater”
	section.
FIGURE 24.	E. Water from a drain valve may be due to the valve being slightly
	opened.
	*F. The drain valve may be leaking at the tank fitting.
	*G. Water in the water heater bottom or on the floor may be from
	condensation, loose connections, or the relief valve. DO NOT
	replace the water heater until a full inspection of all possible
	water sources is made and necessary corrective steps taken.
	Leakage from other appliances, water lines, or ground seepage
	should also be checked.
	* To check where threaded portion enters tank, insert cotton swab
	between jacket opening and fitting. If cotton is wet, follow
	“Draining” instructions in the “Periodic Maintenance” section and
	then remove fitting. Put pipe dope or teflon tape on the threads
	and replace. Then follow “Filling the Water Heater” instructions in
	the “Installing the New Water Heater” section.

184735-000 specifications

State Industries is a prominent manufacturer known for its wide range of high-quality heating and cooling equipment, and the model number 184735-000 is a noteworthy example of its innovative product offerings. This particular model is designed to meet the demands of both residential and commercial settings, providing efficient solutions for temperature control.

One of the main features of the State Industries 184735-000 is its robust construction, ensuring durability and longevity even under the most demanding conditions. The unit is built with corrosion-resistant materials, making it a reliable choice for various environments, whether in humid coastal areas or dry inland regions. This factor significantly enhances its appeal to consumers who prioritize reliability in their heating and cooling systems.

In terms of technology, the 184735-000 incorporates advanced engineering principles that optimize energy efficiency. The unit is designed to adhere to modern energy standards and has potential for energy savings through its innovative compressor design. This technology not only reduces operational costs but also contributes to a reduced carbon footprint, making it an environmentally responsible choice.

The heating element in the State Industries 184735-000 utilizes state-of-the-art heating technology, providing rapid and efficient heating. This is particularly beneficial during colder months, ensuring that indoor spaces maintain a consistent and comfortable temperature. Additionally, it features user-friendly controls that allow for easy temperature adjustments, accommodating the varying preferences of different users.

Another characteristic worth mentioning is the unit's adaptability. The State Industries 184735-000 can be integrated with existing HVAC systems, enabling seamless installation and compatibility with current infrastructure. This aspect is crucial for both homeowners looking to upgrade their systems and businesses seeking to improve energy efficiency without a complete overhaul.

Furthermore, the model comes equipped with comprehensive safety features, including overheat protection and automatic shut-off mechanisms, ensuring safe operation even in the event of an unexpected malfunction. These features not only enhance user confidence but also contribute to the overall longevity of the unit.

In conclusion, the State Industries 184735-000 is designed with a focus on efficiency, durability, and user-friendliness. Its advanced technologies and robust construction make it a valuable asset for anyone seeking reliable heating and cooling solutions. Whether for residential or commercial use, this model stands out as a testament to State Industries' commitment to quality and innovation in the HVAC industry.