State Industries SSE-120, SSE-5 warranty Anode Maintenance

Page 21

When such a condition is encountered, local codes or inspection agency should be consulted to determine which system is acceptable in your area. These may consist of:

•Installation of a second relief valve set to lower than the primary safety relief valve.

•An expansion tank of suitable pressure and provision to avoid water logging.

•Removal of the check valve.

4.Examine the flange area of the elements for gasket leakage.

•Tighten the bolts or, if necessary, follow the WATER AND LIME SCALE REMOVAL procedure to replace the gaskets.

•Refer to “LEAKAGE CHECKPOINTS” on page 22.

Anode rod deterioration depends on water conductivity, not necessarily water condition. A corroded or pitted anode rod indicates high water conductivity and should be checked and/or replaced more often than an anode rod that appears to be intact. Replacement of a depleted anode rod can extend the life of your water heater. Inspection should be conducted by a qualified technician, and at a minimum should be checked annually after the warranty period.

IF YOU CANNOT IDENTIFY OR CORRECT THE SOURCE OF MALFUNCTION

1.Place the water heater electrical switch in the OFF position

2.Close the supply water inlet valve to the heater.

3.Contact your dealer.

ANODE MAINTENANCE

REPLACEMENT PARTS

The anode rod is used to protect the tank from corrosion. Most hot water tanks are equipped with an anode rod. The submerged rod sacrifices itself to protect the tank. Instead of corroding the tank, water ions attack and eat away the anode rod. This does not affect the water’s taste or color. The rod must be maintained to keep the tank in operating condition.

Replacement parts may be ordered through dealers, authorized servicers or distributors. Refer to Yellow Pages for where to call or contact the State Water Heaters, 500 Lindahl Parkway, Ashland City, TN 37015. When ordering parts, specify complete model no., serial no., (see rating plate), quantity and name of part desired. Standard hardware items should be purchased locally.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Statesmantm Electric Models Recovery Capacity DimensionsTable of Contents ForewordApprovals Model & Rating Plate Getting to Know Your Water Heater Installation General Safety InformationTemperature Limiting Control Relief DevicesHydrogen GAS Flammable Piping Diagram ONE or TWO Temperature ONE HeaterONE or TWO Temperature TWO Heater ONE or TWO Temperature Four Heaters ONE or TWO Temperature Three HeatersMedium Temperature ONE Heater Horizontal Storage Tank Medium Temperature ONE Heater Vertical Storage TankMedium Temperature TWO Heaters Horizontal Storage Tank Medium Temperature TWO Heaters Vertical Storage TankMedium Temperature Three Heaters Horizontal Storage Tank Medium Temperature Three Heaters Vertical Storage TankInstall in Accordance with ALL Local Codes Branch Circuit ElectricalHeater Circuits Wiring Diagrams Power CircuitAmperage TABLE/OVERCURRENT Protection Control CircuitSmall Commercial Wire Diagram Small Commercial Wire Diagram Single Phase Phase Conversions300-600V / 3PH Operation Temperature RegulationFilling Start UPDraining MaintenanceFlushing Sediment RemovalNot enough or no hot water ChecklistIf YOU Cannot Identify or Correct the Source of Malfunction Anode MaintenanceLeakage Checkpoints Model SSE Limited Warranty Lindahl Parkway, Ashland City, TN Phone 800-821-2017 Fax

SSE-120, SSE-5 specifications

State Industries has long been a trusted name in the manufacturing of water heating solutions, and their SSE series exemplifies this commitment to quality and innovation. The SSE-120 and SSE-5 models are two standout products in their lineup, catering to diverse needs in both residential and commercial applications.

The SSE-120 is a remarkable electric water heater designed with efficiency and performance in mind. It boasts a substantial 120-gallon capacity, making it ideal for larger households or small businesses with significant hot water demands. This model features a robust stainless steel tank, which not only enhances its durability but also provides excellent insulation to minimize heat loss. A key technology incorporated in the SSE-120 is its advanced dual heating element system, which ensures rapid water heating and consistent temperature maintenance, catering to high volume usage without compromising performance.

On the other hand, the SSE-5 is tailored for locations where space is a premium but hot water needs are still considerable. This model has a 5-gallon capacity and is perfect for point-of-use applications, such as supplying sinks, showers, or small appliances. The SSE-5 is designed with a tank-style configuration that guarantees a steady supply of hot water whenever needed. Its compact structure makes it easy to install in various settings, including under sinks or in cramped utility rooms.

Both models utilize a high-quality, energy-efficient design that complies with modern energy standards, helping users minimize utility bills while reducing their carbon footprint. The tanks in the SSE series are insulated with high-density foam, which not only helps in energy conservation but also ensures that users receive hot water quickly and efficiently.

Another noteworthy characteristic of the SSE series is their user-friendly controls. With adjustable temperature settings, both the SSE-120 and SSE-5 allow users to customize water temperatures according to specific needs, enhancing user experience and convenience.

In conclusion, State Industries' SSE-120 and SSE-5 water heaters combine advanced technology, superior construction, and energy efficiency, making them excellent choices for anyone in need of reliable hot water solutions. Whether for home or business, these models are built to meet the diverse demands of users in today’s water heating market.
Top Page Image Contents