Top Innovations SP-403 Turning a Square Corner, Changing Needles, HOW to Replace the Slide Plate

Page 16

TURNING A SQUARE CORNER

x Upon reaching the desired position, stop stitching with the needle tip still in the fabric.

x Move presser foot lift lever up. x Turn fabric.

x Move presser foot lift lever down. x Continue stitching the seam.

CHANGING NEEDLES

x Loosen needle clamp screw with a screw- driver

x With flat shank face to the left side, insert a new needle up into clamp as far as it will go.

x Tighten needle clamp screw securely.

HOW TO REPLACE THE SLIDE PLATE

x Make sure dove tail side is facing up and align slide plate to grooves.

14

Image 16

Contents Innovative Products to Make Your Life Easier Page Contents Parts Listing Parts Listing cont’d AccessoriesWinding a Bobbin Threading the Bobbin Inserting the Threaded Bobbin CaseRemoving Bobbin & Bobbin Case Threading the Machine Raising the Bobbin Thread Adjusting Thread Tension Balanced stitchStart to SEW-HANDHELD Operation Start to SEW-TABLE-TOP Operation Start to SEW-HANDHELD Operation Securing a Seam DarningTurning a Square Corner HOW to Replace the Slide PlateChanging Needles Performance Checklist If stitch is not formedTurning a Square Corner Limited Warranty Page