TURNING A SQUARE CORNER
x Upon reaching the desired position, stop stitching with the needle tip still in the fabric.
x Move presser foot lift lever up. x Turn fabric.
x Move presser foot lift lever down. x Continue stitching the seam.
CHANGING NEEDLES
x Loosen needle clamp screw with a screw- driver
x With flat shank face to the left side, insert a new needle up into clamp as far as it will go.
x Tighten needle clamp screw securely.
HOW TO REPLACE THE SLIDE PLATE
x Make sure dove tail side is facing up and align slide plate to grooves.
14