Sears 385. 564180 owner manual To Disengage the Upper Knife

Page 30

_To Disengage the Upper: Knife:

\

--b.-'--..b,>_<d_tt! IlO__f'C""no

Upper	_		_		topper	p_n
knob		_	f_ !It	v	_'_Upper,

_	...........................J

1_) Disconnect the machine from the powersupply.

(_) Open the looper and side covers.

_) Turn the upper knife knob toward you while pushing it m to the right, then guide the hole on upper knife to the pin to lock the upper knife m down position.

_ Ctose the looper and side covers.

f

			I
		Upper	,
		knife	I
Upper	'% i
knite	'% i
knob	Slopper	pin	J
	Slopper	pin	J

J

(_) Disconnect the machine from the power supply.

(_ Open the looper and side covers.

_ Turn the upper knife knob away from you while pushing It to the right, then guide the groove on upper knife to the pin to lock upper knife m the up positron.

(_) Close the looper and side covers.

29

Image 30

Contents

Overlock 3j4 Kenmore Overiock Ofcontents Carrying handle Stitch tength Thread guide bar Face plate Presser foot lifter Safety Feature Eel Alwaysturnhandwheeltowardyou LOI Raising = ,.oT L,,.o=,,werin=.g=thePresser=., .. Foot,= Orano Located behind tooper coverHow to Thread the Lower Looper GutdeLower looper ThreadThreading the Upper Looper Toopethread Threading the Needle on the Right Insert Thread between tension discs from Thread gutde plate Needle thread Ension dial Lever thread Thread take-up guide Iiii!iit Thread Securing Ends Turn the fabric over so that the under sIde is up Correct Tension LowerThread tension Thread Tension Adjustment Wrong TensionRead Is loose TensionUsing the Needle on Right Only For narrow three-thread Sergmg Wrong Tension Wrong Tenston Top of the machine Decrease\ To increase IiRemoving the PresseFoot Rl o To Disengage the Upper Knife Ior Normal For rolled Hemming Lght wetght Medium weight Heavy weight Knits LimngRoiled HemmingPicot Edging Narrow Hemming PlateSetting FabricRolled Hemmtng Picot Edging Adjusting Thread Tension PicotThread, Fabric Medium TwistFabric Thread Light$8 SCreW Protect your fingers when you handle it Disconnect the machine from the power supply before oiling Jpper Does NeattySeam ReferenceParts List Index Specification of the Machine Overlock