Sears 385. 17928 owner manual Two-point Shell Stitch, Fagoting Stitch

Page 48

Fagoting Stitch

Set the Machine

Stitch width control 5

Top thread tension control 3 to 8

Stitch len_lth control 0.5 to 2

2

Stretch Stitch

t A: Zigzag foot

The Stitch and Its Uses

Use this stitch to join two pieces of

fabric to create an open work appearance and add design interest.

J

Here's How

1.'Fold under each fabric edge 5/8" and press.

2.Pin the two edges to paper or tear-away backing 1/8" apart°

3.Sew slowly, guiding the fabric so the needtu catches the folded edge on each side.

Two-point Shell Stitch

Set the Machine

Stitch width control 3 to 5

o

"Fop thread tension

control 3 to 8Stitch length control red

zone

Stretch Stitch

A:Zigzag foot

I

This stitch can also be used as a

single overlock stitch.

46

Image 48 Contents
Sewing Machine SEARS, Roebuck and CO Important Safety Instructions Table of Contents Page ArmCoverPlate Page Plug in the Machine and Switch on the Power Safety FeatureSet the Pressure Dial Adjust the Presser Foot Lever Thread CutterTo Attach To removeEtc Check the PresserFoot PresserFoot Types Change the Presser FootStitcing Presser Foot Types Sliding Buttonhole FootChoose e Needle and Thread Check the NeedleFabric, Needle, Thread and Stitch Length Chart To Change the NeedleAdditional Spool Pin Firmly against the thread spoolTo Remove the Bobbin from the Machine Horizontal Spool Pin Ordinary SpoolBobbin Winding Insert the Bobbin into the Bobbin Holder So that ThreadPrepare the Top Thread Thread the NeedlePick Up the Bobbin Thread Adjust the Top Thread Tension IIIFor Zigzag Stitch Top tension Too Tight Too Loose Just RightGuide messagewindow Rickrack stretch Reverse III Zigzag 38Red 3N5Refer to Herring Bone StretchButtonhole Twin Needle Stitches Satin Stitch Acceptable resu Its Darning Dropping the Feed DogsSet the Machine 213Topstitching Sew in a Zipper On the zipper footOpenthezipper Basic Zigzag Stitch width control 1 to Set the Machine MonogrammingWtu Chalk Satin Stitch 234Stitch Length Control Bar Tacking Sew 4 to 6 zigzag stitchesEmbroidery FeedSee 0L\ Sew a ButtonOvercasting Stitch Zigzag foot Blind Hemming Set the Machine Control 2 to 6Stitch length control red For LaceWork Set the Machine Stitch width Control 2 to 213 Three-Step Zigzag Zigzag footBox Stitching Shell Stitching Set the Machine Stitch width control 3 toControl 3 to Stitch lengthTwo-point Shell Stitch Fagoting StitchTwo-point Box Stitch Overedging StitchUseful to join elastic Decorate with Geometric Patterns Satin stitchFoot Stretch StitchStraight Stretch Zigzag foot Stitch and Its Uses Serging or Pine Leaf Stretch Stitching Elastic Stretch StitchSet the Machine Stitch width control 3 to Herring Bone Stretch Stretch Patching Set the MachineDecorative Stretch Patterns Top thread tensionLength control #3t Vests, jackets or coatsBuilt-in System 213-4Stitch SliderSet the stitch selector at U Sew 4 to 6 stitchesStop sewing at the left stitch Using Buttonhole Attachment Template 213504005 213505006 213506007 Sizes 15/16More Varied WillOptional Item Pins a Stitch length control 3 toOptional Item Leave 3 to 4 inches of threadOptional Item Coarse stitches Set the Machine For any of these stitch Stitch width Satin stitch footIllustration a Problem Probable Cause UpperProblem Page Page Parts List 647814020 No Single Needles 647814031 No. !4 Single Needles647814042 Single Nuuou IruR 647814053 No Single NeedlesStorage box Additional Spool Pin Appliqueing Bar tacking Base plate Basic zigzag3648 Zigzag Overcasting Zipper3435 Zipper Foot 13, 26,3435,6667Warranty SEARS, Roebuck and CO., D/817 WA, Hoffman Estates, ILSEARS, Roebuck and CO., Chicago, IL60684 U.S.A 385