Sears 385. 17928 owner manual Sew in a Zipper, On the zipper foot

•Sew in a Zipper

Put the top sides of the fabric together

and sew to the end of the zipper

Fabric Preparation:

opening. Use the reverse to lock the stitches.

Sew the zipper opening with stitch length at "4" and top thread tension at "3".

Set the Machine					]
Stitch	width
control 0
1	23_4	/ Zipp'erteethZipper	tape	1

LU

Top thread tension control 2 to 6

	Stitch	length
	control	2
			To	Sew:
End of opening
\\			1.	Reset	stitch	length		at	2 and		top
				thread tension at 2 to 6.
				Fold back the left seam allowance
	Stretch Stitch			as shown.
			2.	Turn	under	the	right		seam	allow-
Top edge of fabric	E: Zipper	J		ance to form		a 1/8"		fold.
	foot		3.							to	the
				Place	the zipper		teeth		next

J

1/8" fold and pin in place.

To attach the zipper foot:

4.Attach the presser bar to the right pins on the zipper foot.

5.Lower the zipper foot on the top side at the bottom of the zipper so that the needle pierces the fold and the zipper tape.

6.Sew through the fold and the zipper tape to the point where the slider begins.

7.Lower the needle to hold the fabric and raise the presser foot.

I__._	"	,,1.,,_
		_"_
L _'Thep		right hand side_J
		in°nthe
I_	_	The pin on the

_'_'_'I_1'_left''hand' 'side

attach the presser bar to the right pins

•To sew on the left side of the zipper, on the zipper foot.

•To sew on the right side of the zipper, attach the presser bar to the left pins

_ ,,i,,_l_ on the zipper foot.

34