White 1000 instruction manual Removing Bobbin Case and Bobbin, Inserting BOBBiN Into Bobbin Case

REMOVING BOBBIN CASE AND BOBBIN

Hinged

1. Raise needle to its highest	2. Open hinged latch of
position and open the	bobbin case and pull bob-
shuttle race cover,	bin case out of machine.

3.Release the latch and bob bin will fall out easily.

INSERTING BOBBiN INTO BOBBIN CASE

SLOT

1. Pull off 5cm of thread	2. Guide the end of thread
from bobbin and insert it	into slot.
into bobbin case as shown.
Tension spring

3.Pull into slot and under tension spring and draw out about 10 cm of thread.

12