White 1000 instruction manual Sewing on Buttons

Page 26

SEWING ON BUTTONS

1.Fit darning pate as described on page 12.

2.Use button presser foot and attach firmly

3.Place button between presser foot and fabric and lower presser foot.

4.Manuaily turn hand wheel towards you ensuring that the needle enters into both holes of button without obstruction.

(Increase or decrease width settng(.

5.Sew about 7 stitches.

6.Pull both threads to the underside and tie together.

Image 26

Contents White Cleaning Precautions ShouldBe left unattended when plugged Operate where aerosol spray productsPlugs Name of Parts Accessories Removing the extension table Conte NTSName of Parts Front Side ThumbscrewAccessori ES #11REMOViNG Extension Before Sewing By the speed controllerGuide Fitting of Presser FeetFitting Shank Quilting Winding Bobbin Removing Bobbin Case and Bobbin Inserting BOBBiN Into Bobbin CaseChanging Needle InsertingShuttle Race Bobbin Case IntoUpper ThreadingThread Down behndDrawing Bobbin ChangingDirections RotateCorrect Adjusting Upper Thread TensionTurning Wound bobbinDrop Regulating Presser Foot PressureFeed DirectonFabric Needle GuideHce Pattern Selector Operation TablePatterns Setch Pattern Selector Operation Table Seam StartFinish Stitch StraightZIG-ZAG Blind HemmingThree Step ZIG-ZAG Overcasting Edges BindingStraight Stretch Stitch TripleSewing on Buttons Sewing Zips Button Hole Sewing User TipsHemming Freehand Embroidery TwinRace CleaningShuttle HookCz c Remedy