White 1000 instruction manual Before Sewing, By the speed controller

Page 8

BEFORE SEWING

1. Fit the machine pug into

the machine.

2. Plug the machine to the

power supply.

3. Sewing speed can be varied

by the speed controller.

(BE SURE TO FIT A CORRECT PLUG TO SUPPLY

CORD)

1. Remove or install lamp from inside of face cover.

2. Open face cover in direction of arrow.

3. Rerncve lamp by unscrewing

it counter clockwise.

4. Install a new bulb by screw ing it in clockwise.

3. Use only a 120V •15W (Max) “Hi.Light’ brerd e placemert sewing machine lamp. Avalable from your Riccar stock ist

Important: When leaving the machine unattended, servicing, changing lamps or removing covers, disconnect from the supply by removing plug from the socket outlet.

9

Image 8

Contents White Precautions Should Be left unattended when pluggedCleaning Operate where aerosol spray productsPlugs Name of Parts Accessories Removing the extension table Conte NTSName of Parts Front Side ThumbscrewAccessori ES #11REMOViNG Extension Before Sewing By the speed controllerGuide Fitting of Presser FeetFitting Shank Quilting Winding Bobbin Removing Bobbin Case and Bobbin Inserting BOBBiN Into Bobbin CaseInserting Shuttle RaceChanging Needle Bobbin Case IntoThreading ThreadUpper Down behndChanging DirectionsDrawing Bobbin RotateAdjusting Upper Thread Tension TurningCorrect Wound bobbinRegulating Presser Foot Pressure FeedDrop DirectonFabric Needle GuideHce Pattern Selector Operation TablePatterns Setch Pattern Selector Operation Table Seam StartFinish Stitch StraightZIG-ZAG Blind HemmingThree Step ZIG-ZAG Overcasting Edges BindingStraight Stretch Stitch TripleSewing on Buttons Sewing Zips Button Hole Sewing User TipsHemming Freehand Embroidery TwinCleaning ShuttleRace HookCz c Remedy