5. OPERATION
The program numbers for patterns which have been created using the
→1 → 2 → 3 →….. → 90→ P1 → P2 → …… → P9 → 1 → 2 → ……
You can check and change the following parameters for patterns which have been created using the BAS- PC/300.
No. | Setting items | Setting range | Unit | Default | |
|
|
|
|
| |
00 | Sewing speed (zigzag part) | 1,000 - 4,000 rpm | 100 | 3,600 | |
|
|
|
|
| |
02 | Length of knife | Value is for checking purposes and | - | - | |
cannot be changed. | |||||
|
|
|
| ||
08 | Knife X position alignment | 0.1 | 0.0 | ||
|
|
|
|
| |
09 | Knife Y position alignment | 0.1 | 0.0 | ||
|
|
|
|
| |
16 | Running speed (Straight bar tack) | 1,000 - 3,000 rpm | 100 | 2,000 | |
|
|
|
|
| |
48 | Underlay speed | 1,000 - 3,000 rpm | 100 | 2,000 | |
|
|
|
|
| |
60 | Slow speed | 500 - 1,500 rpm | 100 | 800 | |
|
|
|
|
| |
61 | Rear tack speed | 500 - 4,000 rpm | 100 | 4,000 | |
62 | Front tack speed | 500 - 4,000 rpm | 100 | 4,000 | |
|
|
|
|
|
54 |
|