THREADING THE BOBBIN CASE
1.Remove base front cover by push- ing the release button on the left side. Open the shuttle cover.
2.Raise needle to its highest position by rotating hand wheel toward you.
3.To remove bobbin case from shut- tle, pull open latch of bobbin case.
4.Pull bobbin case straight out of shuttle.
5.Insert bobbin into bobbin case mak-
ing sure thread is coming from bobbin as shown.
6.Pull thread through slot of case as shown.
7.Pull thread under tension spring.
8, Holding latch open, position case into shuttle, and release latch. Case should lock into place when latch is released.