PRESSER FEET
SUPER-HIGH BAR TYPE
Simply drop the presser foot lock and slip the foot away from the presser bar.
To aid you in the placement of the presser foot, the presser foot lever can raise the foot beyond the normal "'up" position. After the foot is placed on the presser bar, lift the lock as high as it will go to hold the foot securely.
SNAP-ON TYPE
Raise the presser bar to its highest position by lifting the presser foot lever. Press the toe of presser foot upward as high as it will go and foot is released.
Place the desired foot on the needle plate aligning the needle holes and lower the presser foot lever. Press down on presse! foot thumb screw until the clamping shank snaps on the foot.
ONE-PIECE TYPE
Raise the presser bar to its highest position by lifting the presser foot lever. Loosen the presser foot thumb screw and remove the foot.
Insert new foot from the front and
tighten the screw using the large screwdriver to make certain the foot is secure.
23