BUTTONHOLE MAKING
Always make a practice buttonhole on a scrap of fabric you plan to use. Try the buttonhole with the button you will use.
Use an interfacing between the layers of fabric - tissue paper can be used and torn away after the stitching.
For heavier weight fabrics, loosen your top tension slightly and use a wider stitch w{dth setting.
SETTINGS
Special Stitch Dial -
Stitch Width Control - 1 to 1
Stitch Length Control- 0
Special Stitch Modifier- Red Dot
Feed Dogs- Down
Buttonhole Foot or Satin Stitch Foot Zigzag Needle Plate or Hole
1.Turn hand wheel so needle is down. Remove base front cover by pushing release button. Open shuttle cover.
Insert buttonhoel adapter minus cover plate with pinion gear.
Insert cover plate at 45 degree angle. Snap into place,
2.Screv_ guide pin into the guide pin hole on the base directly behind
the needle plate. Pull guide plate forward as in Fig. 2.
3.Insert a template into the slot of
template holder by lifting the bottom portion of the Template
Holder. Select the proper size buttonhole by turning the Template Advance Knob.
33