INSTALLING MACHINE (Free-armtype)
1.To install the machine in cabinet, position machine head on cabinet platform so that holes on bottom of machine match those
on boards. Insert washers and screws and tighten into place. (Fig. 1)
2.A separate base and cover is available to carry the machine when needed. The base must be removed when machine is used.
To install machine in carrying case, set machine into base, with word FRONT in
base facing you. (Fig. 2)
Place cover on machine with word
,
,
"SEARS" on handle facing you, The case slopes in the same direction of the ma- chine. (Fig. 3)
Push the speed control plug onto three- prong connector, Plug machine cord into any !10.!20 volt wall outlet. Turn on power by pushing light and powe_ switch. (Fig. 4)
Spool pins are packed in accessorybox. Screw thread spool pins in place securely with a screw driver, Position nylon discs as shown.in illustration.
4