Pfaff Embroidery Mode-Stitch-Out manual Precise positioning example

Page 8

Embroidery mode - stitch-out

Precise positioning - example

When adding one design to one previously embroidered, precise positioning is very useful.

1.Choose one of the corners to be the locking point (A). Either move the locking point using touch function - move on the screen or the wheel.

2.Select the next function, position hoop (B), to move the locking point to the right position in the hoop.

Move the locking point to the upper left corner of the embroidered design. Use the touch function - move. Check that the needle is at the exact position.

If satisfied, close precise positioning and start embroidering.

3.To line up the design on the screen with the

previously embroidered, select matching point

(C)to be the corner. Use the touch function - move or the orbiting icons.

4.Select the next function, rotate design (D) to move the matching point to the right position in the hoop.

Use the touch function - rotate to line up the designs. Check that the needle is at the exact position.

5.Close precise positioning and start embroidering.

I

A

B

I

C

D

9:8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Embroidery mode stitch-out Embroidery stitch-out overview To enter embroidery stitch-outCrosshair Color listOption bar More optionsSpeed control Hoop positionTo select locking point and position hoop Precise positioningPrecise positioning overview To select matching point and rotate design Orbiting to check cornersPrecise positioning example Common embroidery stitch-out pop-ups Embroidery unit calibrationAttach correct hoop Bobbin emptyEmbroidery is finished clear screen Change thread colorCut thread end
Top Page Image Contents