Pfaff Embroidery Mode-Stitch-Out manual Change thread color, Cut thread end

Page 10

Embroidery mode - stitch-out

Change thread color

When it is time to change the needle thread, the machine stops and the upper thread is cut. Change the spool and re-thread the machine. The next recommended color is shown in the pop-up.

Cut thread end

After changing the thread, the machine will sew a few stitches and then stop so you can cut the thread end.

Embroidery is ﬁnished - clear screen

When the embroidery is ﬁnished, the machine will ask you if you want to clear the screen. If you touch OK, the designs will be deleted. Touch cancel to get back to your design.

9:10

Image 10

Contents Embroidery mode stitch-out Embroidery stitch-out overview To enter embroidery stitch-outCrosshair Color listOption bar More optionsSpeed control Hoop positionPrecise positioning overview Precise positioningTo select locking point and position hoop To select matching point and rotate design Orbiting to check cornersPrecise positioning example Attach correct hoop Common embroidery stitch-out pop-upsEmbroidery unit calibration Bobbin emptyCut thread end Change thread colorEmbroidery is ﬁnished clear screen