FINALIZE THE INSTALLATION
3. | Slide up the upper flue until it is aligned with its mounting |
| bracket. The bracket must be inside the flue. Secure |
| the upper flue to its bracket using 2 no. 8 x 3/8” screws |
| (included). See illustration beside. |
| NOTE |
| Duct not shown in illustration to ease understanding. |
4. | Remove protective plastic film covering the upper flue. |
UPPER FLUE MOUNTING BRACKET
FRONT VIEW
UPPER
FLUE
HO0140
Warranty
Safety
INSTALLING GREASE FILTERS
Rest rear filters edge on filter springs (A) in the range hood. Using metal latch tab, tilt up the filters into position. Make sure filter tabs (B) are securely engaged in range hood front edge after installation.
A |
HD0393 |
B |
CHANGING LIGHT BULBS
!WARNING: In order to prevent the risk of personal injury, do not install a lamp identified for use only in enclosed 
fixtures.
This range hood must use 2 shielded halogen lamps (120 V, 50 W PAR16 with GU10 base), included.
Refer to page 4 for ordering information.
!WARNING:them. In order to prevent the risk of personal injury, the halogen lamps must cool down before removing
Operation
Cleaning
Installation
1. | To remove lamps, gently push upwards and turn |
| counterclockwise to disengage bulb leads from their |
| grooves. |
| NOTE |
| If need be, use a rubber dishwashing glove to add grip when |
| removing the bulb. |
2. | Install the new lamps by placing the bulb leads into their |
| grooves in the socket. |
3. Gently push upwards and turn clockwise until secure. | |
1 | 2 | 3 |
HO0089
Service Parts
13
